© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Heres a result of the Dyno Jet run, at 5500 feet. Numbers seem low for HP, great for Torque, the car pulls like never before, and my...
Follow this ink to the latest upgrades on my Throttle Body, ECU and ignition conversion on the 78 308 GTS Euro. 308 goes AI......
Running my 78 with the fabulous Holley HP EFI ECU, with learn mode. TWM throttle bodies. Follow my thread...
Custom aluminum Dash Bezel houses Pyrometer and A/F meter. Its all working beautifully! [ATTACH] [ATTACH] [ATTACH]
To get the tach to work, I had to use a programmable tach 'splitter', coupled with the tach adapter. Since my ignition uses a batch waste...
It is super clean, you can hardly see the wiring harness from the engine compartment. Considering this was a universal harness for a new ford...
Update. The car fired up about 3 weeks ago. I had to use Holleys coils (I found a discontinued set on ebay that was new in box). Everything...
Your lowest torque numbers are more than most of our engines' max torque - for Normally Aspirated, well done.
It looks great, Job well done!! whats that rectangular (yellow) badge in front of the drivers side rear wheel?? looks like it says dino??
GT Auto Parts, part number 106981, a whopping 30 bucks. the hose has a double curve to it also, Makes for a sooper fit!! see pics, along with...
I too need a solution for cam trigger. I have some ideas and will report back. Using that old distributor is a great idea!
For 15 years it ran pretty good with the electromotive/TWM setup, as good if not better than the carbs, I never had the ego feedback engaged...
Gotcha on the hoses,, I just measured 21mm based on the diameter of the hose connector mounted on the engine. I saw that you posted that the...
you are correct, I have since gone with 21 lb injectors.
Check out the new system I am using to replace the outdated electromotive tecgt ECU....
heres a pic, I originally designed it for IAC, but it is much more effective in the reverse mode as a vacuum catch. Your system and board looks...
yes it is, I made a catch can system 15 years ago (I think there is a pic on this thread) to grab one bank of manifold pressure from 4...
Superperformance or trutlands doesn't seem to have this 108099 hose for my 78. What is the correct diameter for this hose, the one on amazon...
Hey Folks, its been almost 15 years since this upgrade. The car always ran good, but never good or clean enough. I suspect is because I pieced...
thanks for the great responses guys, I appreciate it. I will see if I can order from SP or rutlands.
