© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Has anyone here sent there 308 to Nick's Forza to have the 4.0 conversion. I spoke with him a while back and he said the upgrade is around...
I mounted my amp under the driver seat. I mounted my CD changer under the passanger seat. I removed the stereo and then the air vents. I moved...
I am trying to search for these numbers with no luck. HAL-5855P rear - HAL-4855P front. First, who has these the cheapest? Next, do a lot of...
Does anyone have a part # for these CV boots? Website? There is someone selling them on Ebay but, they want $90 for 4. I only need 2 now. Plus...
If you dont mind me asking, how much where the shocks? Nice Brembo's too. Is the sway bar the same as Nick's Forza? I heard both front and rear...
Before I make my mind up I thought I would get some input for you guys. I am changing over to QA1's (I think). What spring rate would you...
OK, I thought my rear hub bearing was bad. Once I took everything apart I found my locknut was locked but, not even finger tight. I think since...
I had a V1 but absolutly hated it. Yes, it does work but, I think is a bit out dated (looks wise). Yes, it does have some neat aftermarket...
I was wondering if I could have the axle ARC Sprayed. Then machined back to its orginal size. Then replace the bearings. From what I heard, I...
OK, I have been asking about rear bearings for a while. I wanted to wait until winter before starting this project. Finally I got the guts to...
Verell, That is the exact info I was looking for. Great picture. Now I have a great starting point. Thanks for taking the time to post....
If ruin this nut when removing it can I swap it out for another nut that can be replaced easier?
I am trying to remove the rear hub bearings. I heard that I need a special tool for this. As of right now I have the rotor off. How do I remove...
Is this tool absolutely ness.? Is there a way to make your own. Rutlands said I can rent one for $50/2 wks. Can anyone send me a picture of...
link dead
Don't forget about the missing hardware and drain plugs. I guess I had to buy those to. Gee, now do you see why I asked if he planned on ANY...
OK, to set the record straight I never demanded anything. I have all of my emails send and received and would send them to anyone who wants them....
Open the engine compartment. On the left hand side there is a metal plate under the carpet. That is where the digiplexs are. I think there is 4...
OK My fault. I got it. I guess I didn't think it was that easy.
How do I remove the ball shifter on my 81 308GTSi? I just received my new Momo shifter and I have very excited to install it. Thanks for...
