© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I thought the old school trick was to keep everything wet so the fibers couldn't get airborne. Seems using a chemical stripper would keep the...
I thought the TB5's were the soft ones for racing that didn't last long and the TB15's were closer to a road tire. My TB15's seem to be holding...
Oops! That was the front tire. The rear is TB15 23/62 24.88" diameter and the 205/75 VR15 is 25.1"
Michelin TB5 215/55 R15
Here are a couple of shots of my Dino with the Stratos 15" Speedline/Michelin TB tire combo. Total tire height is the same as the normal Dino...
I wish they made them in 15" with a suitable low-profile tire. The Stratos road car used the same size tire and rim as the Dino but when I put on...
I went to Imola years ago and agree it was a great auto parts flea market. Found quite a few things for my Stratos.
I went to Auto e Moto d'Epoca in Bologna this year and was pretty happy with the show and parts vendors overall. Is Retromobile a better show and...
I had been to Padova a few times and then went to Essen. Essen was a let down for me.
https://www.scribd.com/document/37474775/Dino-2-4-Ferrari-Manual-Complete
Another '74 GTS 06354 with the same angle blade. Maybe it was a late update? [ATTACH]
The service bulletin quotes 8.9mm blade. This blade is the correct width as the locking part of the blade is not squeezed down to 7mm. I am...
I have another straight arm for that side but this, even if not correct, sure seems a better fit with the 18" blades. It could be somebody bent...
This is the passenger side wiper arm on US spec 07924. Does this bend look correct? It sits nicely on the glass with almost no overhang on the...
I have a spare with a broken hinge too. I would give a go at fixing it first. It's a part that isn't too prominent. Some epoxy glues are pretty...
I bought 07520 years ago as a roll over with no engine/gearbox and stripped everything off of it I could. Ended up selling the frame and body to...
I agree not to glue the various coverings to a painted surface unless it is epoxy primer or something similar. The glue on the bare metal will...
I have been lucky finding some of the correct Stratos IDF tops that lets the carbs sit closer together but they are very difficult to find now. I...
Shemp: [MEDIA]
I love all the stooges but I stand with Shemp. No stooge made me laugh as hard as Shemp.
