© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Half way to fully down, so roughly 5 inches. Windows seem to work now. The main symptom that is left is that the car won't stay locked. It locks...
This time just the driver side and it opened half way, while on the previous event both opened only an inch. It felt like the driver side window...
Pressing the fob continuously for a roughly 30 seconds solved the hazard light issues. Windows are working normally again. Fob tries to lock the...
I locked/unlocked a couple of times with the fob (which seemed to work) and then the fob stopped working while the car was locked, i.e. the fob...
I did not see this symbol, or any other symbol except for the "check ok". In the meantime there is some progress: I heard the central locking...
Withe battery of and a small amount of WD40 applied, the driver side lock still feels considerably stiffer than the passengers side
No, the hazard switch was not pressed. Pressing it, seems to change the "blinking noise" inside the car, pressing it again returns to the lower...
With the doors and lids closed the panel displays only the triangle symbol (hazard lights I assume), but no open door/lid symbol. With the front...
Neither window will react to opening the door or pressing the window buttons.
I will try that tomorrow (currently all stores are closed). I'm not sure if that is the issue though since both fobs were working well before (one...
Today my CS had a somewhat unpleasant surprise for me, so I'm asking for your help in diagnosing and fixing this issue (or these issues, if there...
Let's follow your delusion for a moment and assume for a second that Verstappen doesn't know how to expertly drive a 3 pedal, H-pattern car: How...
For me this is rather simple: I only buy sport cars that I intend to keep. Thus someone else can worry about resale value once I kick the bucket....
Was this picture taken somewhere in down town San Francisco, i.e. close to the Slide club/bar? The building in the background looks rather...
I followed up on this: The screws are class 8.8, so they should not be preloaded with tightening torques greater than 24 Nm. I'll switch to...
I'd stay away from this product since the product description could suggest that the seller is either dishonest, technically clueless or both....
Due to the budget cap & detailed technical regulations, it has become a question of efficiency - i.e. "find the biggest competitive advantage per...
Porsches from the same time period have 2-3 times the torque on these bolts, e.g. 65 Nm (996 GT3, GT2, Carrera) 50 Nm (996 Cup)
I wonder if this is one of these occasions where the manual has wrong torque specs; 20-24 Nm seems rather low for mounting bolt screws... These...
Usually there is a lot of tactile feedback and unambiguous accoustic warning signals when trying to put it in the wrong hole. It's impressive...
