© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
This is what is listed for that license plate on the Bureau of Automotive Repair for CA. Vehicle Information STAR Certification Required Referee...
Hi, you might try Newco Products (newcoproducts.com). They might list what you are looking for.
I don't know if these pictures are of any help to you. Both of my vent windows had three screws along the outer window frame that held the vent...
Hi, I remember following this process in the workshop manual for removing the vent window and side window.
Hi, There is a used one listed for sale on eBay in Italy.
There is a 1972 246 GTS listed on Ferrari of Silicon Valley, not sure if it is still for sale because they only have pictures in the listing.
I would like to know if anyone encountered a problem with the inner sleeve being too tight for inserting the inner bushing. I was only able to...
It is listed in the link for EUR 219,000
Hi Mike, Thank you, I wasn't sure if I needed any outside support on the sleeve when pressing it back into the outer bushing. I used my press,...
Hi Mike, Just wanted to check with you, is there any special way that I will need to press the inner sleeve back into the outer bushing. I finally...
The information on Ferrari of Walnut Creek is in the previous postings. To my knowledge the maintenance records were not saved. You can contact...
Hi Kevin, Yes, I am looking for a 2 ton engine hoist and trying to determine their specifications. I did read through your post and I didn't...
Thank you very much. I was hoping that it would be somewhere around this weight, but it was only a guesstimate on my part. I have already removed...
Hi, I am trying to determine the weight of the 246 engine. I haven't been able to find any information with regard to the weight. I am thinking...
Yes, I have already removed all the inner sleeves, and I have purchased replacements.
Does the wishbone outer bushing need to have the yellow zinc applied again. Has anyone done that.[ATTACH]
There should be a part number on the diverter valve. It is usually cast into the area surrounding where the diverter hose connects, looking...
Hi, I was looking at the picture of the tool kit and jack in the Spare Parts Catalogue for the M series and it shows a lug wrench with a 90 degree...
Ok, that is what I thought. Thank you.
Thank you, I am planning on using OEM inner bushings.
