© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have Dino parts high lift camshafts. they recommended 0.20mm both inlet and exhaust. I would be grateful if anyone had any experience or...
The occupant is not as attractive but the background is Bellagio ,Lake Como a few years back. Just under 3000 miles. the best bit was driving back...
did mine a month ago. needed a shim at the clutch end - mine is RHD. To put the helper spring back on I have a long hook fabricated from a piece...
I took mine for a run and warmed it through then took out the plugs and checked if they were ok. - all fine. I then put them back in and waited...
I once had a similar problem with number 4. after a run it would be fine but on initial start up it didn't do much. it was also wet if I let it...
many thanks - as I suspected!
Just had a 500 mile blast in the Dino all was going well and then 25 miles from home the clutch cable snapped! Has anyone out there-any advice as...
I am on my third 'dino' nose badge - they just fall to pieces. Everything made of rubber just falls apart after about a year. perhaps it would be...
Took mine out for a good hammering yesterday - fantastic blasting through the Welsh hills in the sun! Red lined it at every opportunity!...
Iit seems there are fans of Dino's even in a galaxy far away! just been sent this form last years car fest north. [ATTACH]
simon I fitted a fast rack from superformance. it is heavy when parking etc but is fantastic all the rest of the time - if you like throwing your...
I agree with Synchro, go for adjustment first, there is plenty of scope here. Mine had similar problems and needed shimming and messing about with...
you mentioned that the idle screws respond well. I was under the impression that the engine ran ok for a while and then went rough after a run. I...
just a thought; did you check the carbs when the engine was running ok? it might be more revealing if you check them when it is running badly,...
if you found sediment in the float chambers recently it will be almost certainly be deeper in the interior of the carbs. I would just strip them...
This is interesting because I recently had a lead core plug fall out of a carb. When I repaired it I had symptoms similar to those that you...
and wear clothes with no metal zips/ buttons or you will scratch the wings leaning over!-very easily done
many thanks, that's a relief
please guys, this is basic but confusing me. Should the coolant hose at the top of the engine that collects the coolant from the heads and sends...
I cant resist showing you how I got it running again on the day - the recovery truck couldn't get down our narrow lane and it is a hill so pushing...
