© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Ahh, I see. Im afraid that this is the only Diff I have played with - I have no experience of the other type, you might well need special kit. I...
Alberto, here is the equipment fashioned from plastic legs of kitchen units and plywood! Did a run to check the drag from the box, then connected...
My reading of the situation is that the block is the weak link here and making the studs stronger might be futile. I originally ordered dinoparts...
I have used speedi sleeves on a drive shaft and on the crank shaft damper seal to great effect - hghly recommended [ATTACH]
I did mine last month and made a rig to do it that you are welcome to borrow, (I am in the UK) if this is not an option I can photo the rig...
Many thanks for your input guys, I really appreciate it, I am just an amatuer enthusiast who has had an unpleasant experience in spite of trying...
No not dino parts, they have been great throughout, and I have already contacted them with regard to replacing the seats - but things could get...
yes they had been replaced
Yes thats the truth of the matter. Rebuilt by me with dino parts cams springs and pistons. It ran on the test bed for 4.5 hours and then ran...
here is a pic of the sheild offered up - note the access hole at the back for the 19mmbolt [ATTACH]
Pleased you approve. The heat shield is available at;...
In the end I made a sheild from modern materials - with a lid! I admit its a poor pic but it illustrates the point [ATTACH]
my engine used to start on 5 and then go to all six after a few minutes. To cut a long story short it was a leaking valve stem seal on number 3...
thanks for the help will sort it this weekend. For the record - I actually marked the shaft when the engine was out -on the top surface - as the...
Just got my engine back in the car but am having trouble setting up the gear box to the stick. Has anyone got any tips on the best way to set it...
Brand:Frost Code: V135 Name: Frost Ali-Clean (1 Litre) ©Frost Auto Restoration Techniques...
Looks fantastic - did you do anything with the brakes? I would love to know how to improve them - but remember I am still on 14 inch rims!
I just rebuilt mine - I cleaned them out with Frost Aluminium casting cleaner first - the difference is unbelievable
Ok, the engine now has about 4.5 hours on it and it is running sweetly. I checked the clearances and most have closed up, some just 0.02mm a...
make that 3, please keep us posted
