© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
This may help you, GCK story starts around page 10 355 Engine Out Servicing - Part 2
Good luck Dave with the repair. Sorry to mention the obvious regarding the carpet but yes it has caught people out before. When you replace...
A few suggestions for you: 1. Be sure carpet/mat is not interfering with pedal 2. Ensure correct adjustment of cable. If cable is too tight it...
Taken last weekend so almost qualifies under this thread title. [ATTACH] [ATTACH] [ATTACH]
Here is the location of the NFD: Vale Royal Abbey - homepage A local Premier Inn to stay with good parking and adjacent place to eat. Some...
Great looking car Clive and it will be a great competition to look forward to in the summer (here's hoping the summer arrives). Looks like you...
Top guys, top service and extremely helpful, highly recommended by me!
Excellent Paul, your car is looking magnificent. The guys at the MOT station will no doubt be well impressed!
I bought a pair of brand new 355 sports seats a few years ago which I was going to use in my car. Although they are different colours, to retrim...
Perhaps a better picture with the seal expanded the same way as your photograph. [ATTACH]
I have just taken some photos for you. The first picture is an old dust seal from the caliper. In the last picture I have tried to hold the...
Sorry but I have not read all your thread except that you think you may need seals and dust seals for your calipers which may be the same as...
I made my own from good quality external plywood, 18mm doubled up to 36mm thick: 760mm long 600mm wide with a 75mm x 75mm x 5mm cut out to...
These are the grounds on the RH head of a 2.7 car so may be similar on a 5.2 [ATTACH]
A couple of pictures from when I did mine. The first is from a few years ago when I replaced the joint and boot, the second from when I removed...
Eric, just read my post and it is unclear. You are correct, the engine will not turn on the starter if the shaft is broken. I tried to say that...
I had my old shaft analysed for the failure mode. The shaft appeared to be hardened all the way across the diameter which caused it to be...
Same thing happened to me, broken shaft. One thing you can do to confirm, does the engine turn on the starter? Also, did it go very quiet after...
Hi Pete, the place that did these for me is here: http://www.redditchshotblasting.co.uk/ They are very helpful people and may be able to assist.
Thanks Paul. I found a very helpful powder coaters who looked for the right colour and texture to match pictures from the original sales...
