© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi Greg, This is from the 328 "technical specifications" manual - I don't know if similar exists for the 308. It's listed as service buleltin...
Hi Greg, Have you considered checking the signal ouputs from the flywheel sensors? There is a process to checking the Microplex listed in the...
Hi Hookem, I think the part was identical up to MY1989 cars. My 1988.5 has a fiberglass part that makes an "S-bend" into the accordian hose....
Hi Gerry, Here's a link to an article I wrote previously on the 328 A/C system. Just a note: my A/C compressor seal replacement only worked...
Hi Mr. Staino, That is the A/C thermostatic control leading into the expansion valve (covered in black tar tape). Basically, it "senses" the...
Hi Jeff, I have an article (also) on changing the coolant for an 88.5 328. If it's one of the large hoses behind the water pump, I have seen...
Just a thought - if the spare is original, shouldn't the valve caps match? Carl
Hi Jon, Not obsessive at all. The above-posted valve stem is the "current" Ferrari listing, but my '88 9000-mi car came with the type pictured...
Hi Poleapart, Suggestions above are excellent. However, a few other possibilities: * If your WUR is sticking (and fuel injection control...
Your legacy lies in inspiring others that they can work on these cars. Be proud. Carl
Hi Tillman, Look at the off-white domed valve in the background of your picture. There's a vacuum line that leads into the top aspect....
Hi 4valve, Good advice on above. To which I would only add: replace both hoses while you're there, and inspect/replace the remainder in the...
Hi Tom There is no mechanical advance in a 328. The Microplex electronically controls the ignition advance curves. Does the engine run...
Hi Mark, I found this picture (US 1988 328) of the FI computer plate for reference. Best, Carl [ATTACH]
Hi Al, Are you asking about water (center gauge between speedometer/tach) temperature or oil temperature gauge? Best, Carl PS: If...
...but Carl's one of those NCRS guys, so replacement wasn't exactly an option...(smile) Total was $213 I believe, including a $50 diagnostic...
Just wanted to post a resolution here. I sent my Alpine unit (#7904) to Pyramid Audio in Austin, TX ( 305 E Braker Ln, Austin, TX 78753, (512)...
Hi Tim, I have an article on how to do this, but it's quite large due to pictures (32MB as I recall). It's for a 328, will be very similar to...
Bob, drop me an email at [email protected] and I'll email you a "How-To" article on hardwiring for a 328 (very similar to your 308)....
Hi Augustine, Not too difficult - the FI test procedure is on the CD I sent. I also have the CIS test gauge set. First, before you open...