© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
USD. Not sure of shipping costs yet but will try to get them sent directly to you (or a few to one person for forwarding in-country.)
The lube is to get it off and then on. Easy to clean it once back on
I found this below on Eng-tips. There is a guy in Portugal selling a converter for £32 on eBay. If you need exactly a divide-by-two, you could...
Lube it up and warm it up with a heat gun on low or hair dryer.
You might find something off the shelf that will work. I found this on google but there must be more. Anyone know the specs of the signal (the...
From memory (which is not good) I think a new rubber boot can stretch over (old one may be too hard and break.)
I finally have a reasonable offer for the IDF/IDA manifolds. They will be $600 a pair for 25 sets. I haven't figured out the throttle linkage but...
I put a description and some pics. Watch out for cracks when you press in the new bushes...
Disregard— just looked up a QV head and see the angle is cast into the port unlike the 2V.
Sean, are those flanges 45 degrees to each other? Doesn’t look like it but may just be the angle
Hej Alex, I suggest you just buy one and find an engineering student at you local university to do the drawings if you can’t yourself. If you are...
Apologies if I'm asking the obvious but have you checked the DC voltage? One or more of the diodes may be bad or the regulator.
If you pull the regulator (which holds the brushes), this shows how I held the brushes retracted to put them back in:...
Sam, as Bubba says, those are individual throttle bodies with open trumpets to give a better sound to the engine. Usually you have a filter or at...
I think Hagerty is usually fairly accurate except that to keep insurance premiums higher they are quick to follow the market up but slow to follow...
I’m not an expert but have heard 10 years from a few sources over the years— mostly related to Minilites. Having refurbished my original 308...
Well if you are going to race in that group you have to pay the price :-) Let us know when you are racing so we can watch or follow your progress...
Nice to see someone who understands the embrittlement of old magnesium wheels-- it would be really sad to risk such a lovely car. Since 16" wheels...
Those Marvic wheels are good replicas of the original Campagnola wheels. I would go with 16” for the better tyre availability.
If I get my wheels made they would be 8” and 9” wide to fit standard cars, not widened, so would not be that wide at the back.
