© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Mine is an 86 , K-Jet, I have the Dave Helms Fuse box fix. Unplugged and replugged the connections under the expansion tank. The fuel pumps don't...
any update? Is the problem fixed? If so what was the problem? (I am currently having some issues with right bank no spark and after swapping coils...
RH Master Cylinder [ATTACH]
Mine's fiberglass as well, no metal grill. Maybe it was changed to metal grill with later models?
Thank Tim, Mine has the same holes, but a little different, maybe the earlier models were different, (see attached ). Is your's made of metal?...
that is for a 86 Testarossa!...
I'm currently restoring the front end and I've taken off the A/C condenser shield panel, which doesn't seem right. There is one hole for one of...
Sean, I've learned a lot from many members on this forum, it's good to hear that I was able to help. I'll be keeping a lookout on the clutch as...
Shimming the clutch is not playing with fire. It is a necessary when updating the Clutch and Pressure plate. It is in the WSM that the shims must...
It's an easy job. Just loosen the 6 nuts that hold the pressure plate, one at a time . There should be shims (washers) between the Pressure plate...
After you bleed the system, if the problem is still there, ask your mechanic if he recalculated the shim sizes. (refer WSM page E7 - ,E10). If he...
With the new Clutch and Pressure plate, have you worked out the new shim sizes?, and installed them? If not, you can add shims through the...
How did you find a this rare Testarossa RH Monospecchio?. Was it advertised anywhere?
yes, good to use the old flywheel. Would recommend to re-surface the flywheel while you are there. Do you have a photo? It may need to be resurfaced.
I would resurface the flywheel.
Not normal to replace flywheel, but resurface (or grind ) is normal.
that is correct. It's in the WSM, 7.5Kg-m. This is the torque I used when I re-assembled all 4 wheels after painting them.
congratulations. (Was the photo was taken in Cromwell Street Collingwood ?) Now I know there are at least 2 RHD monospecchio Testarossa's in...
Do not start the engine until you found the problem. Your engine may get damaged if no oil is lubricating the bearings etc, if you start it. Take...
Dave's Hoses are the best, no question. I'll have to get them......thanks
