© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I can't believe the interest in these units. Even if one can afford the $20K-$30K price for one of these, is it really worth it? Imagine if you...
I would first check to make sure the vaccuum is the same, at idle, on both banks. Next, I would check and compare the Warm-up-regulator cold...
I can't imagine how a 308, with ONLY 205 HP, can ever be worth more than a TR.........IMO. If the TRs value gets close to the 40K mark, then I...
Has anyone converted a CIS TR into an intermittent fuel delivery system?........as found in the 512TR? Just curious!
I agree..........I have no intention of puncturing ANY wire. I have a separate KV measuring instrument, which I will use first. It seems that...
Jeff: The figure was 0.017"-0.020". Trying to "understand" the workings of this system, I started by adjusting the plunger where no fuel comes...
The red and blue probes are direct wire-type connectors. I think they are referring to the "old" style ignition system. The kit also comes...
Just finished my major on the TR. While doing it I removed the FDs and cleaned the plungers, not realizing that I should have measured the...
I am trying to hook up a lab scope to the ignition of my TR. The instruction state that the red probe goes to the primary, while the blue probe...
Mike, and others: Thanks for all the information. I did call my rep and they will add "rigid tapping" option. My machine gets sent out next...
Thanks guys: It seems that I have picked the right machines, for my intended purpose. Mike: Are the Fanuc controls based on the G-code? I...
It seems that your dad is very satisfied with the Haas brand........any negatives? I purchased their Toolroom mill (TM-1). Never used a Haas...
Just wondering who else has a vertical milling machine, or lathe, to make things like unobtainable small bushings, etc. Last Fall, I made two...
Very nice! I am putting the finishing touches on my "Ferrari Garage". The final thing to install will be the lift.........sometime in July....
Add to this, the fact that low mileage TRs, 3X8s, had 4-5 previous owners. It is hard to believe that all of them purposely chose NOT to drive...
IMO........Something is wrong!!!!!!!!! I find the following things disturbing, for a car with only 21K miles. 1) "Dash not exposed to sun"....
John, I just put the mill and lathe for sale, in the Green Bay classified section......starts today. I already ordered my new mill. Are you...
Whenever a seller uses words like "Museum Quality", two things pop into my mind: 1) Price is too high 2) He should be selling it to a museum
Talk about getting an answer from someone who knows!!!!!!!!!!!!!!!!.......Thanks. Are the measurements taken with the car on the ground, or up...
I have Eibach springs over Koni adjustable shocks, on my car. The problem is the small (1") space between the tire and the fender, in the front...
