© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
My rusty block before and engine after. The engine produced @200 Hp at @5K RPM, 245 Ft-Lbs torque on the Dyno last week. Now for the body work...
Having just watched my 4.2 rebuild run on the Dyno yesterday, I asked about oil. Interestingly enough, the rebuilder mentioned that the rope seal...
Well, here is where the e-type project stands to date. The restoration (mentioned earlier) shop appears to do quality sheet metal work and has...
I spent several hours with a restoration shop owner. He said the E-types were built with extremely close body fit spacing, resulting in paint...
My 1970 2+2 coupe. Will never be a show car, but a driver. Hope not to get too upside down on it. I guess I'd better get Macco. Thanks [ATTACH]...
Have decided to do something with my jaguar e-type other than let it sit for another 20 years in the garage. The engine and trans is currently...
I've purchased several parts from Daniel at Recambi and have always received excellent service. He is very knowledgeable and cordial.... a...
A winter project of mine is removing door panels and servicing the window mechanism. Does anyone have a recommendation on a door speaker...
Geico insures my Mondial t and Chevy truck for $480/yr, but I carry no comprehensive on either.
Although I'm not a certified AC tech, I do play one in my garage. I just solved the no-cool-air problem in the daily driver's AC system and...
Gene When I had the same problem with bleeding, I checked with a mechanic at Ferrari/Washington DC. He said the engine needs to be running...
I remember the first drive my son and I made in the Ferrari. Some guy at a light next to us (in a pickup) said "Nice Car". My son grinned from...
I usually put a solder dab on the exposed copper wire at the top of the crimp using a small solder gun and silver solder. This will hold and make...
I can take a look. pm me for directions and a contact #.
My Mondial t had the same problem as the factory did not paint/coat the rim sufficiently to prevent rusting over time. Removing the weatherstrip...
The Red Optima I purchased last year had a cell go bad way too soon. Of course, the battery being so new and expensive, it was the last thing I...
Using 3/4 plywood, good quality casters, and wood stops allows me to move my E-type easily. Cost: a saturday afternoon and @ $100. These were...
Use the fuel pumps to pump out the gas. I did this a few weeks ago and it was so cool! PM me for a how-to. The directions are in the workshop...
Here is my 1990 Mondial t assembly plate. [ATTACH]
David Antonio may have started the weekend a bit early with your car, omitting this assembly plate?
