© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The first thing I had to do was locate the two main bolts holding the headlight at its pivot point. [ATTACH] [ATTACH]
These first two shots show you how my headlight looked before the repair. It wasn't completely obvious when driving, but people definitely...
I've decided I ask way too much of the community without contributing any real "useful" knowledge, so I'm going to try to contribute what I can...
Did you ever get an estimate?
I should also add, even without cats or O2's, i do NOT get any o2 codes. Just the coolant temp, and thermocouple ecu codes. Stupid question but is...
Yes the breathers definitely go to the tank, then tank to intake, but you could be right about swapping the two tank lines. Anyone have a clear...
Not sure why i cant find an electrical schematic for this harness. I found the pin descriptions at the ecu but that doesnt help me with testing...
Let me know what he quotes you because i have the same thing on both sides of my 348. I need it done as well but in Rosso. I would think it would...
How much do these go for? Seems like a very simple design so should appeal to the bargain hunter!
I would have only been inclined to do a leakdown if i had a cylinder with low compression. But all of my cylinders were 195psi
Is there a breakdown and pin diagram easily accessible somewhere on fchat? Thats a good idea.
Still have these? If so i would like them.
I would agree with flywheel. Probably could use a re-grease if thats never been done. There are so many components to the flywheel system. It...
So i replaced the coolant temp sensors, and unplugged the cat temp ECUs (since the thermocouples dont go into anything), restarted and STILL got...
Thank you mike. I greatly value your expertise. Ill get the temp sensors replaced then ill bag the end of the blowby hose to see how much im...
63k. So definitely a driven car, which im fine with, just wish i wasnt burning. Im not too concerned with the rings as the numbers are good. Maybe...
Is it possible to bypass the oil blowby hose that puts it back into the intake? Why would anyone want extra oil going back into their combustion...
So i just HAD to put all the hoses back on and run it ONE MORE TIME (without the oil change or sensors done yet), after cleaning the hoses of all...
So after camping out in the garage for a week, i finally dug far enough where i found some good and bad news that i may now need more help with....
And i only had it up for like 3 hours, but had 5 calls and 3 different texts. Thats when i knew i needed to take it down.
