© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Regarding post #51, does that apply to the Boxer as well? Can the diff be removed/replaced/adjusted through the side covers with the engine in situ?
Hmmm - upon closer inspection, you are right, they are not pressed steel as I thought, however the underside that does not have foam on it feels...
Hey Newman - thanks for your observation. When I referred to matte, I guess I meant satin, which is what I suspected the finish was (i.e NOT...
Could you check your wing to see if the black finish is glossy or matte? I have seen it both ways and believe it is more correct for the finish...
I am in for 6, perhaps more for spares if the cost comes down. It would nice if a properly sized rivet was included as well, but now perhaps I am...
I live in Malvern. Dave's discription is spot on. What day will you be here?
Mike Pechstein of Vintage MotorSports - the most honest shop you will find, not to mention reasonable rates and a top notch job. I have had lots...
Drew - I used Swain Coatings in NY - I think Dave was the one who gave me the contact. Cost more to have them done, but the material appears...
I know a good Ferrari guy in Stowe, PA, near Reading. Not as far west as Lancaster, but I know his work well and he does very thorough...
Sounds like a reasonable request and the person assigned to test drive the car might be someone with some M5 knowledge, but probably just a...
Can the Boxer guys check to see if they have the trim finishers that hide the ends of the black weather strip on the bumpers. They would be...
This is all very good informatiom. Does anyone know if this outer bearing removal procedure will work for a Boxer? I am guessing that the...
Sounds fun - I should have it back together from the rear suspension rebuild project by then, so count me in.
'84 50355 red/blk with cloth inserts PA
There is a small metal plate uner there that the four bolts go through and sandwiches the belly pan to a hard mounting point on the frame. I...
FWIW, I got the book thrown at me in DE last Feb - five separate counts that won me the agressive driving charge prize (need five at the same...
Great guys - really appeciate the feedback - keep it coming, esp from the XKE crowd. I know the 911 is a more useable, modern car with a slew of...
As some may know, I have a pristine '84 512BBi that I do use on the weekends in the warmer months. Problem is, I am pretty overprotective of it...
I think the last post was spot on, however I do not believe the reliability factor is a misconception. Everything I have read on the carb'ed cars...
The hub is bolted in from behind, so they would just need to leave the provision for it - in my mind it makes it easier to make. I agree with the...
