© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Guys - I know it has been said before, but all the wheels listed above are nothing but compromises. By my count, there are at least ten people on...
Someone mentioned the two can sport exhaust had the middle tanks but lacked those on the side. Could someone send a pic of that? I guess they...
What does the Bell list for? Were they negotiable? Thanks
I ordered one from Ferrari UK recently and received the flat strap ala Dave and Gary - I agree that the book shows the one made from wire, but I...
Dave, Great advice - the headers slowly cook the inners until they simply tear at the creases. I bet the guys on the board who have had their...
Same location on my car - An L-shaped platform was fabricated using the original studs and a 7AL2 was mounted on rubber bushings to the platform....
If memory serves correctly, the yellow one in the middle is for a/c and comes on with the a/c switch If you replace the thermal switch - you...
Gotta be the temp sensor that screws into the radiator - it is a thermal switch that can go bad. It can also be tested in situ when the car gets...
Something does not add up here - there is no way that car is worth $7k. The model question was really the type - base car, 944S, turbo, turboS....
Thanks all for your input. I am pretty well plugged into the locals, but thought a boxer specialist was in order given all the bad tune-ups I...
Frank - Is it the one for the tire or the rim? They don't have either. Thks
All - Can someone send me a high res pic of the sticker on their Boxer's spare tire (the rubber part). There might be a facility to have these...
This might be for the Classic section - move at will..... I have spent considerable time and $$ doing all the upgrades/services that a BBi...
FWIW, my car has the 7AL2 running stock wires and stock coil and has been in that configuation since it was coverted to MSD a few years ago by the...
FWIW, I bought my Boxer from a private seller in the Houston area in early '04 and Ferda had done a lot of work on the car, including the PPI I...
Wow - I am sure it is easy with the proper tools but I don't have them.... Since you had indicated that the outer bearings are the ones that...
I had a look at the cam drive pulley's and they are buried behind the crank pulley and the front cover looks like a b!tch to get off. What would...
Is 518 the blue halomar stuff? When I use it (or silicon), I never run a bead but instead just use enough to tack the gasket on both sides.
Good advice... In looking at the parts schematic, I cannot tell if there are two bearings per sprocket shaft or just one. Could there be an...
I know the 7AL2 is used for those applications as well - I guess I failed to mention that my Boxer is 10' off the ground and is powered by a 700...
