© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have mine installed, great quality and they look great!
Any modification required to fit the wheels on a stock 360?
Replacing the bulb is really easy. Take the bezel off, then use a small flat blade crew driver, to turn 1/4 turn and take out. I had to use needle...
It's an LP-70 Neo-wedge base lamp from All Electronics $.20 each. All Electronics | Electronic and Electro-Mechanical Parts and Supplies at...
Sold!
I had the same problem with my Becker, it turned out to be a shorted drives side speaker. As I was told by Becker, the radio will turn off its...
Bump.
Hi Tony, The wheel is a direct fit, no modifications are required. The connectors are regular spade connectors. One female ground connector, and...
More Pictures [ATTACH] [ATTACH]
I'm selling my 360 steering wheel, airbag and surround. It's the single best improvement for a Ferrari 355. I had it on my 355 and absolutely...
Eric, I have a TCU 196986. I usually have the Sport mode set all the time but I do not experience the "Launch" mode. Then again, I may not be...
Count me in! Thanks 360trev
Interesting. How did you engage the Race Mode without a switch? Eric, is there a way to enable Race Mode on a CS TCU?
Steve, I had the same problem. I replaced the bank 1 cat ECU with the most current ECU part 179278 (green top) and it solved the problem. The old...
I used the larger of the two with the Hyperflow cats on my 360. Universal O2 Spacers with Catalytic Converters - Fabspeed Motorsport
I've had all the same issues, fried EBrake cables (3 sets of EBrake cables) and constant CEL's on my 360 (Fabspeed headers with ceramic coating,...
Here is the link for the module that fixes the bad brake light disabling the F1...
It's a fact on the 360, if a brake light or break light switch is broken, the car will not engage into gear. I do not know if it's the same issue...
The factory headers are encased in a metal shield. The third part headers are not. I was lulled into believing that a ceramic coating would reduce...
It could be both the brake switch or the most likely the brake lights. Ask me how I know! Stef sells a plugin module that fixes that issue. I...
