© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
For the 328's/308Qv's there was a change in the exhaust valve clearance, as recommended by the factory. It changed to 0.30mm-0.35mm....Not sure if...
The original Sanden fitted to Euro and UK versions was a SD507. The SD508 won't fit standard Euro brackets.
https://www.facebook.com/share/r/1F2RrVpbNi/?mibextid=wwXIfr
I've never heard that with mine. The solenoid I referred to is the starter motor solenoid.
It's pronounced toll-man. It was a British car transporter company, owned by the Toleman family.
Yes, i'm pretty sure it is.
That white wire feeds the starter solenoid and is often the cause of the Solenoid clicking issue. On mine, the wires hadn't been crimped to the...
Not sure about suppliers in America. I'm in the UK. Here's what you need ; Viton 70 X Ring 19.99 X 5.33. Two are required. Make sure that whoever...
Firstly, be 100% sure that the leak isn't from where the dipstick tube joins the union that is screwed into the engine. If you are absolutely sure...
This is a useful document for calibrating the lights.....
I used acrylic paint for the logo
First time attempt with an inexpensive (relatively speaking) stencil off e bay.... There are imperfections, but I'll probably make it look worse...
The issue with mine was a crimp that joined the white wire from ignition switch to the connector block in the foot well. It had never been crimped...
Voltage drops through the circuit are often the cause of this problem. The solenoid doesn't fully engage due to the voltage drop. Therefore you...
Lip seals are not something I would buy again from them. I bought some a few years ago. They may have changed their supplier since then, hopefully.
If you replace the seal, this way, I don't recommend that you buy the unbranded ones that the Ferrari spare part reseller's offer (in the UK). Get...
Ah, ok. This one as attached? I think someone must have repainted mine in the past. It had the UFI logo on the lid and side. And is this the...
Does this also apply to a late UK 88 with ABS?
There's a bleed screw on top[ of the thermostat housing. Have it open when you fill the system. I've never found any need to open the rad bleed...
