© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I think the deformed image is the same image that shows the compressor. The Rotalock valves are the two valves on the compressor cylinder head....
Screw 23 is for checking the oil level, not filling with refrigerant. You need to make your self a dipstick as shown: [ATTACH]...
A friend of mine in Germany is considering to sell his Group 5 spec Pantera. Quite an interesting car. Here it is last year, at Daytona...
It wont destroy the engine but turning the engine backwards onto the timing marks won't necessarily get all your timing marks aligned correctly....
As above, patience, patience and more patience. Then think twice every time you do something. It's not difficult, but as you pointed out, there is...
Topped up air con, today. 300 grams R12. Don't think I will get hot, now. Outside temp 22 degC in cabin when photo taken. Gotta love R12!
It was a Sanden R12 SD 507 that was fitted to euro spec cars of that era. The R134a equivalent is an SD7H13. This compressor comes with many...
I disconnected the cold start injector on mine, a few years ago. Even though the fuel system and operating pressures were within factory spec and...
I have a gas analyser that can measure CO, and when checked against an MOT one it was accurate, amazingly. I'll use this to adjust the CO and...
Got it! Do you know why anyone would want to readjust this to 2.5% CO? It was done by a so called 328 Guru mechanic. All this seems to have done...
Because someone reset it to 2.5% CO, sometime ago. It's never idled as well since. So I intend resetting it back to factory spec and see how it...
Hi All I understand that the fuel mixture adjustment screw is behind what looks like a slotted cap (shown in photo). Did the factory seal this...
Try, for example, fitting a Triumph motorcycle aftermarket (L J Harris) brake master cylinder and /or reservoir without any of the three banjo...
In my experience there's actually more chance of a new Copper washer leaking unless it's also annealed. I'm sure the Copper content of the average...
A while back the right hand window was smashed on my October 88 328. The window scraper seal has been slightly deformed during the glass...
What your experiencing could be caused by a potentiometer within the instrument. It's track gets dirty and starts creating erroneous voltage...
I found it very hard to source those pieces in black. Almost all for sale that fit are chromed. Eventually found the assembly on ebay.de. There is...
For the UK, Shell did use to recommend 5w-40 Helix Ultra for 308's/328's, but now they recommend Helix Ultra 10w-60. I asked them why they...
11m 875 is a standard A/C belt for Euro spec 328's. As mentioned before, you can buy exactly the same belt as a Ferrari dealer will sell you for...
Thanks, very useful answer.
