© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
These M24 x 1.5 cap nuts cost a couple of quid from Ali Express, quality is fine: [ATTACH] Search for "2pcs Metric Hydraulic Tubing Inner Tooth...
They're also the wrong width. Too wide on the front, too narrow on the rear. Would I put a cheaply-made wheel with fake centre locks ***and ruin...
If gearbox mounts are worn, linkage can touch subframe. Possibly mounts only have enough give to allow this to happen when car is warm and rubber...
Oil pressure sender 135940 can be replaced with VDO 360-081-030-122C - specs here:...
Me neither. The thing is, it's self reinforcing. The Spider becomes the "unloved" one and then nobody wants to buy it because it's the unloved one...
This is where we are in the UK - and we're supposed to LOVE convertibles. Have to confess I look at prices like this and seriously think about...
I don't buy Capristo's theory at all. Manifolds fail because they are made of thin steel, expand when hot, touch neighbouring tubes etc. EGTs are...
No reply from Gobble; not surprising as this is his business and I do not judge him at all for that. However... it turned out that my box had...
Thanks all - I've IM'd him.
I retrieved the PIN from my immobiliser using a brute force approach implemented using a Raspberry Pi to simulate key turns in the ignition. I was...
Reminds me of the Lego Technic Test Car set, which I coveted as a child but alas never got for Christmas! [ATTACH]
I think it's a totally different die. Still, for those who worry about telling original vs repro apart, that's one difference. I hope the repro...
Could you post a pic please
The embossed horse on the repros is actually too good. This is how it looks on original seats [ATTACH]
No, Superformance can supply for much less than that.
Variety is the spice of life but if I could justify putting 15 grands worth of carbon into the car, I would replace all the body panels with...
Thanks. If my garage tried to charge me 800 for changing fluids when I'm already paying for 40 hours for a major service, I'd be having words. I'd...
How is that price justified. Ferrari book time is 40 hours IIRC, but a decent indie can do the job in half that or less. That's a labour rate of...
You might be able to cobble together a solution from the parts here? https://www.hillengineering.co.uk/suspension-steering/steering-wheel-related...
I don't think there's anything off the shelf, but you could model something in CAD and have it made up by a machine shop. I have the Momo boss,...
