© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
An update for general info: 1) I managed to repair this without resorting to sending the unit out for rebuild or ( heaven forbid) buying a new...
The early 456's use a TEVES electrical / hydraulic brake booster system. I believe the 456 hydraulic accumulator and pressure switch are...
Thanks guys. In fact I believe the 456 hydraulic accumulator and pressure switch are interchangable with parts supplied by AC Delco (#25528382 -...
Had the same problem with the passenger seat on my 95 456GT when it was first purchased - no motion. Turns out there is a fuse under the seat...
Thanks Taz - unfortunately with my problem pumping the brake pedal does not depressurize the system. Which is part of the reason I know the...
The hudraulic brake booster (rear of the master cylinder) on my 1995 456GT appears to have quit working. The electric booster pump assembly...
Thanks guys for all of the helpfull input. There are several items - such as intake manifold gasket issue I was not aware of. Latest development...
I have a 95 456gt with the pre OBDII ( MOTRONIC 2.7) injection system. On a recent ride got an intermittent check engine 1 - 6 light when the...
I REALLY LIKE the wheel adaptors you fabricated - two questions: 1) what kind of two post lift is it? 2) Can you provide some detail on the...
I have a 95 456GT and love the sound of the V-12 but hate the fact that at idle all you can hear is the annoying whine of the cooling fans. I...
I had a similar problem on a 95 456GT a few years ago. I removed the radiator and took it to a shop in Trenton NJ for repair. No problems since....
Hate to admit it but I did that one by feel - the book says 98 Nm = 72 ft-lb
Error in my previous message - that socket was 1 7/16" not 1 7/8"
After having done this service below are some comments for the benefit of others who might be contemplating it. 1) This is not a difficult job...
Thanks Dean
Can someone tell me what size socket is required to remove this bolt - I am about to start this service and anticipate I will need to use an...
I finally got around to removing the level indicator. Result was that the polyethelene float was filled with gas and obviously had sunk! I...
Thanks Windsock. I will remove the sender and see what I find - appreciate the advice.
I have developed this problem on my 95 456GT - indicator was erratic for a while - now only reads zero. Can you advise how to bend the baffel to...
Super - I will comfirm receipt when it happens. Thanks ever so much Ron Viani
