© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Whatever the source, I would be looking for closed cell foam. Open cell foam (which is typical in inexpensive foam products) is essentially a...
I would say Webers are more Georgian, having not arrived on the scene until George V.
That 'thingy' is also a pressure switch, overpressure, I think. The car has separate over pressure, and under pressure switches. These days you...
There is also the fuse block from @TurtleFarmer: https://www.ferrarichat.com/forum/threads/new-fusebox-covers-for-308-in-stock.687993/ which is a...
Kerry, I fit the seals into the master cylinder first, then install the reservoir. I put just a slight smear of brake fluid on the reservoir...
I dream about stretched but otherwise stock body GTB with longitudinal carbed qv engine/gearbox.
Awesome, thanks.
Sorry to bother again, but Google doesn't seem to help when searching for MAT, a company with whom I'm not familiar.
Let's just say I had a much different experience.
From where did you source the fiberglass parts?
The canister style you have is most likely original. My filter is indeed a spin on, from Baldwin. My original filter assembly was damaged and...
You either need to drain the tanks, or much easier, clamp the fuel line between the left tank and the filter assembly. You can get purpose made...
I didn't need to loosen 24 and 2 when removing my rack. The two U joints (6 & 38) allow the lower column to flex enough to separate the #6 joint...
Hard to drive while crossing fingers. Really hard to understand why you just didn't do it correctly.
Since November?!? Something is amiss. The actual time to disassemble/reassemble is probably about a day. (I've done Brit car booster rebuilds, and...
Very cool look. I like the forward louvers, as it keeps the Ferrari look. Smooth might look too Pantera. I find the headlights are reminiscent of...
Lovely. How about a shot of your apparently bumperless front end?
Well, that is indeed a very important detail. That would indicate a venting issue, as noted by @mike996. Not sure what the evap system looks like...
I would NOT recommend the Nouvalari Super Sport version. It's super loud and unrefined. And it had to be cut and re-welded to fit.
Edit: Looks like you have a carb 308. Fuel should move easily between the tanks as the fuel transfer pipe is about 40mm in diameter, so unless...
