© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
More OCD than type A I think ;). It's just a piece of flat aluminum. But I definitely understand being particular about things that you want to...
Rough dimensions can be had from.....the bell housing. I made a gasket from thin closed cell neoprene sheet I had laying around from another...
Try searching for "1.5mm brass rod". I got a bunch of results. 21 Pieces 1.5mm Brass Round Rods, Sutemribor Brass Solid Round Rod Lathe Bar...
That's an unusual mounting location for the alternator.
I guess I don't understand custom plates that repeat badging already on the car. How about things like NITRITO, BASSO, DOLCE, ULARE?
Ah, thanks. I’m obviously not familiar with the 458. There are aftermarket screens available for CarPlay retrofit, but most are largish.
Where did you find such a small screen?
You probably think it's too short because the deck lid doesn't go as high as you think it should. At least that is what I thought when I first got...
I waited two years for Verell on the bezels before I pulled the trigger on buying them from AW.
I just ordered and received same from AW Italian in January. Not cheap @ $135 per, but in stock.
On my 2V GTB, with the inner wheel arch liner removed, it is very accessible. I've never tried to remove it with the liner in place, but can...
Should be easy enough to isolate the wiring from both the speedo and the sensor to test resistance while manipulating the cable run. That should...
Perhaps you should compare the rear pair of damper/springs and see what they look like.
We all in this together, so why not help out when you can:). I know I've learned a ton on this forum, from many contributors.
If you want to make the wheel liner screw/washers disappear you can blacken the stainless yourself, or buy pre-blackened pieces from Bel-Metric,...
While I'm definitely not as far on the spectrum as say, @Vonbarron, sometimes I find that receiving a bit of purist hate makes my day better. ;)
Next I will introduce you to tinyurl.com, whereby you can take your long links like the eBay one and reduce it to something like:...
I would also offer there are probably better H4 type replacement LEDs out there today.
Try using Google image search. I just did and saw many possibilities, too many to list here. edit: https://www.ebay.com/itm/384853615285 When...
You can do it with just one guide tool, and most anything with a tapered point can work. Snug up the mounting bolts, but not fully tight, then...
