© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Does any have a source for the 2 and 3 line plastic holders that keep the CIS metal line in place? I broke every single one of them when doing the...
I don't other than what can be found on the internet. The conversion was done by Historic Race Engineering of Costa Mesa several years ago.
2:30 at COTA in a Stock E36 would be tremendous IMHO and would equal my best time with my CS on old R compound Street tires...for reference here a...
Mine had a 4L60 with an MS shift setup and slaved to MS engine management. Despite the 4 speed and twin turbos, off the line the difference...
Is it Auto or manual? Just musing - speed is 110mph (being generous considering the precision of the Ferrari speedometers), 1000 revs before...
Your profile mentions "interests" as "12yr old jokes"...I think you are a little optimistic, I know a 3 yr old that can top that.. don't quit your...
Seems to be a consistent issue with those batteries. I installed a PC1100 in my CS and after 10-12 months of regular use the charge wouldn't hold...
Poor car, those are the hardest 3958 miles ever put on a car, even LeMans racers have an easier life...
My '80 MO does not have the hydraulic leveling system, just the high pressure shock levelers so it's pretty simple change over!
Both front and rear windshield were removed when I did the respray on my car....both broke :( Trim is glued on...
...hum, I going off a write up that was done a while back - the spring that was used was spec'd out a 250lb though after some investigation it...
Replacing all the belts so no biggie since there is plenty of space out front especially since the radiator out for service...Honestly the 400 is...
Thanks for the responses. Brian, they are cut at the top so I presumed (erroneously) that someone had come up with alternate way to install....
I am falling into the typical "while there" trap after redoing the full body restoration of my 400iA. Now the body is done I am waiting for the...
For cost reasons and adjustment ability, I have opted to go with the QA1 & 250lb springs as it looks pretty much plug and play...there goes the...
...you must be quite fit :)
1++++
I am in the process of doing a partial restoration on my '80 400iA (pictures forthcoming) and trying to sort the rear suspension which has always...
I disconnected the battery on my CS for several weeks as I was not driving it. Took it out for a drive a couple of times and both times I noticed...
Same a replacing any 360 exhaust which involves removing the rear bumper and undertray. see here:...
