© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi Jeff please check your conversations. Thanks, Urs
Michel I am very sorry I forgot about this - I will do it when back in HK mid Jan!
Hi Roger check your conversations please.
[ATTACH]
Very nice Guido!
Would you sell them?:D
Well the flasher relay is not controlling the daylight flasher as such - it's a direct connection in the stalk switch. It routes the function to...
Gunn thanks for your update it's great to see the project is on good tracks!
I decided to cut off the offending lip and sure enough, some of them are sitting inside the edge, nice and tight: [ATTACH] I cut them all off:...
Nothing visibly or measurably wrong with old vs new sensor. But they need modifications to the holes spacing as you can see in the below pic:...
Engine started missing again, as soon as she warmed up. Fuel filter checks revealed nothing: [ATTACH] [ATTACH] Caps and rotors are perfect, all...
I also fitted the final clutch slave heat shield [ATTACH] [ATTACH] I noticed a proximity between the starter motor heat shield and the engine...
RHD only issue with the driver's footwell carpet due to the stepped floor (gas pedal torsion bar) - the carpet wears off really quickly due to the...
So - speedo keeps dropping to zero intermittently above 40mph so I pulled it to check the move the pot and add a tiny drop of WD40. No change, so...
The light switch, when off, grounds the coil of the daylight flasher relay "v", which will draw around 150mA when the car is off.
Euro 208 GTB/GTS with both contact breaker and electronic ignition [ATTACH] [ATTACH]
If you are interested in readable wiring diagrams send me a message.
Modification to a 32 nut for speedo sensor fitting: [ATTACH] [ATTACH] [ATTACH]
As the spare tire belt is breaking down again, I had one made with a "safety belt" type insert: [ATTACH] And the jack bag got hard and cracked to...
