© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Dave, Yea, that shudder. I was hoping it wouldn't come through but you guys have eagle eyes! Anyway, if I were better at shifting i.e. when...
Yes, it is stock. When I first tried it, I duct taped the camera to the passenger seat (leaves no trace). Here you are in the car, surrounded...
Hi all, Here is a video I made this weekend for fun. 1978 308 GTS - Carbs. The microphone was placed on the rear engine cover on the flat...
Hi J.S. Here is a thread on my 308 GTS at 5200...like James. Anyway, some of the Fchat heavies weighed in on this. I hope it helps. For my...
I used the term "shunt resistor" but it is really a ballast resistor. Terms aside, it's function is to simply limit the current on the output of...
FRONTYARDRESTOGUY, I have a 78 GTS so I am assuming our systems are similar. There is no amplifier in the sotck system but there is a small...
78 308 GTS The window switches can cause high resistance with dirty contacts. This will lower the current to the window motors. My switches...
Geez, I really should read closer...sorry. I guess you tried the battery thing. To home in a little closer, get a small mirror and make sure...
Bluemax, I just did mine too and it is smooth. If it's clicking and popping, you will have to inspect the whole thing. Depending on how you...
Hi, I came late on this thread but you might look at this to give you an idea. I think the GT4 and 308 were similiar in this area. I would...
Newbydude, I fixed my blistering right signal light hole and posted it here. When I did it, I had to drill into the main bar thinking it was...
Hi Bill, I don't know how much of a computer tekkie you are so you can take this or ignore... First...LOVE the youtube. I should do this...
Hi Seamus, Here's a thread that started where you are. I ended up putting my fan rebuild in it. The pics might help. Good Luck, -Rjay...
I can't tell from this thread. Do these mats fit a 308? Specifically, a 78' 308? If so, I'll buy em. -Rjay
Phil, I found that with the new ball bearing pulleys, they can take a lot of tension without binding. I agree that slack would be good but it...
Testors white enamel...a toothpick....patience...go slow and wipe off excess with a soft rag. The paint doesn't stick to the chrome. Oh, and use...
So I finished my right window. It is a pain working through the holes in the door panel. Here are a few things I did and a few I found out....
Anybody know anything about this? -Rjay
