© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I m selling a set of Ferrari 355 factory wheels. They are in very good condition and are mount with tires now. However, tires are very old....
[ATTACH][ATTACH][ATTACH][ATTACH] I had this set of wheels on my 355 before. Sent from my iPhone using FerrariChat
Hi Tom, I have a voltage meter to monitor the voltage. It always stay above 12 volts. In fact most of the time is over 13 volts. Alternator broke...
It is strange that the glowing cat issue disappeared. I drove more than 10 times after that day and I didn’t see the cat overheat anymore....
The air pump is still working whenever cold starts. It run for few mins and stopped. How could it affect the cat when the pump is stopped ?...
This happened after I had 40 mins hard drive. So the car wasn’t running cool. Coolant temp has been changed 2 years ago. It seems working fine....
Both of the header and cat are aftermarket. Changed by previous owner. My car is a 2.7 version. Sent from my iPhone using FerrariChat
Thanks for the information. So what should I do to locate the problem ? I didn’t feel that I was losing power though. Sent from my iPhone...
Guys, I found out one of my cat was red after 40 mins driving. [ATTACH] No light goes on. Any idea ? Sent from my iPhone using FerrariChat
[ATTACH] Sent from my iPhone using FerrariChat
Thanks all for the help. By the way, I found out this. It’s really cheap. Anyone has experience with those non brand MAF ? $36 only. So damn...
Thanks so much. I just bought this. Sent from my iPhone using FerrariChat
Hi Guys, Anyone has source of new MAF for 2.7 engine ? Bosch 0 280 213 012 seems not longer available. Thanks Joe Sent from my iPhone...
FYI I bought those under panels in brand new condition last year. They are still available I think. Those shown in the pics are new ones from...
Thanks. Let me ask around then. Sent from my iPhone using FerrariChat
Hi guys, I couldn’t source this part from anywhere. See if anyone could help here. It’s a bushing holding the Generator in place. No. 4 in...
[ATTACH] For those who are looking for a comfortable bucket seats, you may consider this one. I found out this online after I bought the Pole...
If the sides of the seat are high, it’s difficult to get in and out of the car. That’s why I picked the Pole Position which has a lower sides...
Current setting is a little bit higher than the OEM Seats. It will be the best to install it without rail. With the current setup , the head...
To be honest the OEM seats are more comfortable. The thigh support of PP is very good but the back support is not enough. My back is a bit...
