© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
You have a problem here, definitely water in that oil although doesn't look like too much. Change the heat exchanger and run several changes of...
Dan is selling kits for 360/430 directly for skilled DIY or local indy. No doubt more models coming soon.
Almost any medium sized city will have a local gas spring strut manufacturer who can remake from an original sample. Shouldn't cost more than a...
I replaced the original grey relay with the 430 red version. I fitted a new relay socket of correct size (very easy with correct crimp tool) and...
Cost will be $29, same as my 355/360 solution.
First round installed and fit and function is good. Just a few more weeks reliability testing and we will be good to go.
Transmission heat exchanger performs a very overlooked but important role in heating the transmission up from a cold start. This is why it's...
The car will only start after the F1 gearbox light on the dash goes out. Can take a while until pressure builds in the system.
You could fill the void with knead epoxy filler commonly used to repair metals. It's very thick and adds good weight once set Sent from my Lenovo...
The clutch kit from eurospares UK is incredibly good value and very complete - I got this kit when I did my 360 F1 clutch. It has everything in...
Hi All. I am in the process of developing a low cost replacement catalytic converter thermocouple solution for 456/550/575 models. I would like a...
It often needs a ton of torque to break loose. I find a breaker bar with a constantly but slowly increasing pressure (no sharp impacts) gets the...
F1 software is smart enough to not allow it to go into reverse while moving forwards. It won't even let you change down into a low gear if you are...
2 terminals on the sender, one for the gauge (a linear resistance proportional to pressure) and one for a warning light (on/off at a certain...
Explainer about your slow down light https://technistrada.com/content/7-ferrari-slow-down-light-explained Either a spark/fuel/ignition issue is...
I have developed a replacement for part number 179278. This is the aftermarket unit people are mentioning. 0% failure rate so far. [ATTACH]
Correct, unlikely to generate the heat required without cats to get a slow down light as there is no honeycomb for the excess fuel to burn off....
Nicer digital version with searchable text and high def colour pictures Modena: http://www.filedropper.com/ferrari360modenaworkshopmanualnew...
Thermocouples are easily checked with a multi meter. Just set to continuity or resistance check, if the two pins don't measure close to zero ohms...
Your TCU is from family CFC201F.05 which is good. It can be re-flashed to CS software quite easily.
