© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Eagle E-Type? It's a UK outfit that does basically what James' saying right up to wider wire wheels for modern rubber fitments. Having said that,...
RIP John. :(
In Malaysia I drive a manual RHD and drive on the left side of the road. In China I drive LHD and drive on the right side of the road. The LHD are...
As Kds pointed out, two different cars. That said, if you like the looks of the 997C2S...never, never test drive the 996TT..;) Like one rennlister...
You got that right Mike. It's a heck of a car for little moolah. Had a drive in a mate's way back 20+ years ago in the UK. T'was a roundabout on a...
Looks great. Looking forward to hearing from you on positive feedbacks with the installation. 456s in general, and most 550s suffer the bane of...
Nice car Mike :)
Porsche wheels don't fit on Ferraris and vice-versa. Ferrari's 5 stud wheels' Pitch Circle Diameter (PCD) or Bolt pattern is 108 x 5. Exception...
Superformance GT40 methinks. The real McCoy'd be in the ££MM range,all RHDs too but the shifter's at the right hand door sills. Nice find Hakim.
Brian, if you can get the Scud at 1.8MM, I suggest you run off to the nearest finance company and you'll get yer 100% loan approved pronto...;)
+1. Except there's one RHD F50 at Talacrest. Ex.HRH Sultan of Brunei.
London. Kidwhizz' a UK chatter.
Rosso Monza special colour. Much has been said about this shade being difficult to touch up etc.... But Malaysia Boleh..:) Just go to PPG centre...
Taz and Allan. Stock offsets of 43.65mm FF and 32mm RR of a Maranello means they're more 'inset' than the quoted 22 and 10 of the Champion wheels....
1 - The offset figures are under 'Rim Specifications'. 22mm FF and 10mm RR . 2 - Forged Aluminium are common nowadays. Lower weight, higher...
+1. I believe it ran the flat four boxer powerplant of the Alfasud and hence it's a FWD vehicle.
Any Porsche is a DD sports car. The more you drive it, the less your visits to the dealers for leaks etc....;)That's the beauty of it.:)
Check with rennlisters. Quite popular with the Pcar crowd. Made in Japan by Speedline JP and you can find it only under the Champion moniker. IIRC...
+1 and the slots are normally painted over in satin black making it look like a rear bumper vent/exit duct.
Nice job Robbie..:) Your attention to the tiny detail(s) sums up your great craftsmanship.
