© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks for posting this. I am enjoying the read
PM sent, thanks
Please state your exact problem and any codes or lights so that we may help you
Thanks for you input so far Iain I had a thought :) If you needed a puller to remove the outer bearing ( as pictured in your post above)...
Good ideas...I will try tham all, thanks. I was thinking...that if there are no more snap rings...I can pull the housing all the way out until...
It will require a VERY special tool to catch the lip on the inner race ...seeing as how the rollers interfere with the clearance. If I can get...
What does it look like? How does it work? Maybe half-round legs with very thin feet to fit under the center race? May have to make /alter...
Nope...won't budge at all...just my luck...simple job is turning out to be a nightmare...taking 6 times longer than planned..every step of the...
Ok...I've removed the ring nut ...VERY difficult...took 400 lb ft...this was after heating-up with acetylene torch....turned out it had...
I'm stuck...ready to remove the bellhousing on a Mondial 3.2 QV but...I can't get the bearing off the input shaft. Some have suggested walking...
er...not bad for ANY car...midengine or otherwise. I would be glad to drive ANY street legal car that can do Nurburgring in under 8...
7min12sec is CRAZYSPEED seems like just yesterday that 7 min 30 sec was unheard of. They also just posted a time of 7 min 3sec for...
Thanks, much apprecialted if you can find the number
Clutch friction disc for 1986 Mondial 3.2 QV thanks
Ya, I saw this...and hope that this 308 proceedure is close to that for the for the Mondial 3.2 Thanks
I may have to edit my post. I had just finished working on my Porsche last week and could have confused the two??? I believe the Mondial...
Ok...I got the left rear fender liner out and access looks pretty easy. I took off the gearbox cover ( ten bolts) and gear oil came out. Now...
You would not believe all the crap that gets stuck between the condenser and the radiator. If you pull one or the other...you will most likely...
red turns pink in the sun......especially convertibles
Good to hear. Anyway I can borrow your tool and ship it back to you? or just buy it and then offer it to the next FC in need? BTW..where to...