© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks for all the helpful replies, Hans... Has anyone tried the non adjustable "Aluma Matic" version...
Thanks, do you happen to have the spring part #s for the GT4 application? I can't find any "spring for shock" info on their website
Is anyone using the original springs from the car with these or obtaining new springs (from Proma Star?) ...
Does anyone know if this is the correct rebuild kit for 308 GT4 Koni shocks? 7610KIT | IKON 7610 seals kit | MG Cycle - Moto Guzzi Parts and...
I have a new set of 8 bushings for front suspension (F#104398, S/F #103170) inner A arms that I don't need, and I do need a pair of ball joints...
While previous posts reinforce that beauty truly is in the eye of the beholder, it is easy to see why many maintain that the the Dino, from it's...
While the 308 GT4 is a clear example of Wedge Line design innovation, and the 458 is an evolution of Flow Line, with exaggerated "Coca Cola...
I recently ordered some used parts from Eurospares, extremely fast shipping and exactly as described, a positive experience for me...
Any knowledge of it's history? I seem to remember from my Playboy reading youth that white Ferraris were the car of choice to award centerfold...
Nice find! I take it there is no lock to secure it in place while the spring is compressed?
Must be a German thing. Both Google and Ebay deliver no results here. What year / model Porsche are they used on?
I have been looking for a similar solution, every spring I have found is too strong. I tried using the "idle set by throttle cable" but it won't...
Any idea of where to obtain them? I put LED lamps in mine and a toggle switch to turn them all on (when the doors are closed) and have been quite...
I think there are 18 on each, but I would have to look to be sure (or maybe Mike can chime in, it seems fresh in his memory!) I had ordered 3...
Mine has it on the windshield, about 1/4 of the way down. With the steep angle of a very large piece of glass it does help, but I would prefer...
I was able to score a few 100 to fit M6 at $0.50 a piece from the local surplus house, if anyone want some for the next pan install you are...
Thanks for the reply! The Energysystems boots are specified by the stud hole (shaft) size, the base size and the height. They seems to be...
I need to replace the boots and it would be nice to have a better lasting version, energysuspension makes a variety of boots, listed by size. If...
I have a function generator I no longer use as the sine wave distortion is too high for my needs, but the square wave would be fine for this. You...
Are you sure it is an electronic speedometer? I have seen evidence that a few GT4s were equipped with mechanical units
