© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Well, after reading through this thread, this video (M D Clutches) comes to mind. Somewhere through the video Andrew mentions that their kits come...
John... important news... check your email
For whatever reason, the 'conversation' board does not highlight a new posts coming to me...? I just sent my email coordinates to you, might be...
conversations...
check your 'conversations' page
Other option might be to check with dismantlers. If they find a worthless one they might send it for postage...
What 'Qavion' said.... The only other thought for a quick try would be a Reboot.... Power disconnect for 15mins.... allowing the ECUs' memories...
Certainly a reboot is always good! If it sounds like running on 7-8-7 at an idle, stalling when coming to a quick stop, then check the wiring plug...
michaelz check your pm's....
thanks for the ramp info...
"Timeckart" In your last pic loading the 512, what are those black extensions to the ramps. Are they available retail, or are they your own build?...
one from the rear.... [ATTACH]
I've used an aluminum 'open' hauler to move the 348 to FL from Canada and back for a # of years. Hauled with a diesel MB, very easy as the trailer...
'cantthinkofone' very nice offer... I'm sure others will be contacting you! I purchased the posted tool for the 18lbs($30.Can/$25US) and as stated...
my thanks to 'Mod' for correcting my error!
Well, I've found a much cheaper 28mm Ring-nut Tool that will fit the 348 steering wheel center, as well as the main belt drive pulley nut of...
I had that problem with my 19" on my 348. Solved it by winding(stiffening/raising) up the front springs/and rear. My car is lowered, still is, but...
You know, the 348 hvac module is known for many headaches. Try disconnecting/resettting battery/power to your car for 20 minutes. You'd be...
I'll echo "pnicholasen'. That's the way one can do it on a 348! My next major will have it sucked dry... just way too much fiddling! I'm sure it...
Do a search on 'Ernie" and his gas tank pressure woes... will explain everything. I've forgotten now but a valve, possibly the roll over valve,...
