© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I believe this part fits a 348 as well...!
Thanks for that info, Miro. Hadn't heard of that arrangement before. Now you've got me thinking how great that could be! ... as long as it turns...
I'm going to assume there is both a 'switched' power(ignition) and a 'constant' power for memory of stations/sound settings? Any chance those 2...
Thanks for your update. A hard pill to swallow for sure! If it were me... well... just dreaming, but, a trip to Georgia(GEARS stealership) would...
Wow... just an excellent set of views of the MC. Again, Miro, thanks for sharing your experiences.
Well, here's MD Clutch's video of a 348 flywheel. At point 13:30, Andrew explains the bolts/removal tool(Renault. Great video for anyone wanting...
A bit off topic, but I'll share my experience with electronic safety sensors. Driving a 2015 ML350BT to FL with bicycles hanging on the hitch. It...
my guess is you have some air in the delivery pipe up by the master. The initial 1/3'd is compressing the air, followed by proper flow/movement....
you have to dig a little deeper... Down at the lower part of the page you will have listings of every conceivable AC parts... Choose dryers & acc...
I have(348) polar bear's compressor for +2 years, $350<>$400. and their dryer $40<>$50..... well worth it. You can also purchase OEM Compressors...
X2000 LOL!
Just a thought... Canvass some of the high end recyclers'... not sure that to many people would save their broken lights! Good luck.
Ok... change of heart... nice warm day, LOL! Pulled out some 13mm wrenches and adjusted the master clutch push rod, pretty simple. What a...
Thanks Miro, I crawled under the driver's side dash this afternoon. I'll admit it was cold & damp in the garage, so I wasn't motivated to f-around...
Well, clutch is back in. I'll play with the pedal setup tomorrow unless anyone has any other ideas...
Wade: "in another life(70>80s)" I used to roadrace factory Yamaha TZ750's and TZ250's throughout North America. Had CMA, AMA, & FIM licenses....
Thank you... I was trying to figure out what was being said. I assumed he was talking about Hill's T/O Bearing but had never heard it explained as...
John, yes, you are correct in the hydraulic and throw out bearing functions, so no adjustment values that I know of. Thanks for the pedal set-up....
So, wanted to add another thought, but ran out of editing time! The other thought I had was to leave a larger distance before pedal activates...
Gentlemen(& Ladies) 91 348TS (Driver car..) some history unknown. The Short: Purchased the car 5 years ago. Clutch released high on the pedal....
