© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
None of my steering wheel buttons are backlit. Only the engine start one until the car starts. Any idea how to diagnose the issue? All buttons...
I had this issue. Replaced two valves in the engine. Noise went away. Ferrari part # 254425 VALVE WASH See this thread: 458 Engine Ticking...
I have novitec springs on my 458 and am always rubbing the front fenders with the tires. Its a pain to raise the front with the lift kit. Any...
Do your pads squeal after this bedding? I am looking to get new pads as well. Am considering these
Those paddles would be perfect combo with the tricolore buttons. How much are those paddles? I cant seem to find out on their website.
Hey guys, I just want to let you know for anyone looking to install white LED license plate lights on a 458, the following worked for me: -...
I agree, With the novitec springs the car is super smooth, especially in bumpy road mode. Glides over most bumps
Hey guys, Wheels are aftermarket ADV1 and have a more aggressive offset than factory. Maybe that contribuites to the problem. I can see the tread...
Hey guys, I have a 2013 Ferrari 458 spider with Novitec springs and lift kit. The issue I am having is the front tires both rub on the fender...
Whats your reviews of Mase engineering tune for the 458? I am considering getting it.
So does the ZR1 ceramic rotors not fit the 458 top hats? They seem to be identical.
Bumping an old thread. Did anyone ever get these ZR1 rotors attached to the 458 top hats? My 458 needs front rotors and pads, am trying to...
Instrument dash Gauge Face Ferrari 360 F430 Cluster Facelift Overlay 360KM/H | eBay
I have an aftermarket scud style one as well. Yellow tach, in kms.
I have a set of OEM F430 gauge faces with Yellow tach if someone is looking. in Km/h
Sounds like sticky relay somewhere
If your pump didnt prime the accumulator, it wont push the car into neutral, and car won't attempt to start. Which is probably why opening the...
How much would the carbon intake manifold be?
Check for vaccum line leak near the throttle bodies. I had a slight leak near the MAF which caused it to have to restart twice and bounce the idle.
Looks good. Where did you get the carbon gauge cluster surround?
