© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
do you have a tig or mig? since bearing is being replaced, the old race is junk-right? Get some 1/4 or 3/8" bar stock, cut a diameter piece...
early 12s typically used-in many but by no means ALL instances-"inertially welded" valves made by Eaton(look for the "E"...as the implementation...
is this a PD algorithm/duty cycle controlled waste gate-a-la-USA catalyzed versions...or...is it early NON-cat with 3 "flat" exhaust pipes to rear...
most probably it is the angle of the cut of the plate when looking at it from the side view...think of a carb throttle plate and the chamfered...
why? smoke? knocking?...at idle, or under load, or after you take your foot out of it? "ticking at idle"(cams bouncing back and forth in the...
#3 Black & white photo shows the complete chassis on the horizontal milling machine. IMO: Probably a SIP Jig borer, but since its horizontal(I...
this is the gradient scale used by a "profilometer" (Mitotoyo for example)used when evaluating surface finishes-be they a cylinder head, bores in...
Agreed... on almost all points...I was in the first couple of rows as this rolled over the block. This car will likely not transfer ownership...
with respect to some/several physical truths and realities: The frame utilized in the "P" car series of 0810, 0812, 0814 and 0816 was done so...
if thgis is representative of all cylinders-these are whaqt we call:" rock star numbers"
evaporator and condensor's capacities are too low to cool a car with such a greenhouse effect to cool to the desired levels i expect you are...
read the ad-he clearly states that these are reproduction I recently saw a set of FACTORY thin wall 9" BB/LM365 wheels...easily worth 50K...
1976 only in fiber glass...there were only 100 made(i have #42)...these are rare, and only collectible 308 from numbers perspective......
Are there any REAL experienced, "experts" here in this forum? ...Having done engines in real comp cars? this is pretty esoteric and technical...
