© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I pulled the connector at the air flapper and measured the voltage at the AAV. I got 12 volts, so I cleaned up the AAV connector and put...
Thanks! I will check it out!
I can't seem to find the air flap switch on the wiring diagram....
Thanks so much. I had determined that it was the beige wire, but had not tracked down the air flap switch. My problem my be at that connector at...
I have been chasing down why my 328's idle stays too high after initial startup. I comes down very slowly as the car warms up, but takes way too...
That is a good price.
I have seen some used ones for sale, but replacing a failing part with a used part makes me nervous.
Thanks for the heads up about the switch and the flyback diode.
Just a "heads up" to anyone who thinks they may need a new ignition switch. They are tough to come by now and expensive. I had determined that...
Like the wheels and the mirrors. How did you get the adapters that were made?
I did use white lithium grease. I have to take the door panels off anyways sometime to fix the stereo speakers and speed up the windows, and...
Yes, using the key to lack and unlock the driver's side door several times unfroze the passenger side. It opens and closes like a dream now. I...
I got it o[en this morning. I used the key to cycle the locks from the driver's side a couple of times, and the door could be opened. Thanks for...
The locking "knob" is up and won't push down. I thought of the suggestion last night to take the other door panel off and see if I can determine...
Would a "slim jim" approach work on these cars?
I would hate to mess up the door panel, as it is perfect.
The key will not push the door lock down and binds when you try to unlock it. I think I will need to get the door panel off, but don't know if it...
I bought this '87 328 early last Fall and have been going through it. So far I have replaced the timing belts and tensioners, the water pump,...
My 328 and 911 tech definitely has grey hair. It's me...... I don't trust others to work on my cars. I will outsource any machine shop work, but...
