© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Did you take any photos (of the procedure, not of the colourful moments :) )?
The filter in Aldous's post is part number 180132: http://www.eurospares.co.uk/searchResult.asp?find=+&S=180132 However pls note that these...
I've never had any problems filling up and your problem could be caused by the fuel vapour canister: Ferrari 360 Fuel Anti-Evaporation System |...
Are you actually planning on driving your car? If so, I would exclude this from your list. 750 miles/year average? In the best of cases it's been...
I'm Italian, and the WSM translation is accurate (copied below) ie it says it should not be screwed down - but it wouldn't be the first time the...
I've recently been told by a Ferrari mechanic whom I trust that, regardless of what the WSM says, the correct oil level is obtained with the...
Gear oil (from the transaxle) smells really foul, it should be easy to identify (or rule out).
Ferrari 360 Annual Preventative Maintenance | Aldous Voice
It's also good practice to check the tow hook actually fits in its hole at the front - I have seen reports of the hole being rusty or full of...
That's a good idea - what diameter of clamps? Is that garden wire or electrical wire? Yep, I have the WSM on my iPad (which I always carry on...
That's definitely not an option for us on this side of the pond! :)
I forgot about this - the previous owner left me one of those Velcro stick-on pouches with a one litre bottle of Shell Helix engine oil in it. In...
Beautiful! I guess it's not possible to get the same result polishing it by hand?
Just to add a bit of colour, my 360 is definitely not a daily driver. I use it for weekend trips in England & Wales, so usually < 100 miles, and a...
I'd like to get a feeling of what tools/spares/etc. people carry with them on a regular basis. I'm NOT taking about documents or electronic...
Which fuse did you replace? The bonnet actuator and the interior light are two different fuses (labelled 9 and 10 below): [ATTACH]
Thanks for the video. Is it safe to use an impact wrench to remove titanium wheel bolts?
In my experience opening/closing the soft top is heavy on the battery if the engine is not running - I always try and avoid doing it on battery...
Who did you send it to for the re-finish?
Looks great. Was it difficult to remove/replace the intake covers?