© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Good question. I have been testing the secondary system as well, disconnecting and re-connecting to observe any changes in engine operation. So...
One of the main problems with the video as that those guys are hacks! Prying A/C belts of with screwdrivers and pulling the exhaust out while the...
I needed to spin the engine for between 15-20sec, at which time I stopped to let starter "cool" for about 30sec. The next time I tried it...
I am not certain but believe that the best way to ensure the car does not start is to remove all control relays related to injectors and fuel...
Yes you visibly note pressure rise on the gauge when cranking. It is clear and immediate.
I found out what was wrong and fixed it easily. I was looking at the wrong gauge. :)
I am just about to start up the car for the first time after an engine out. Right now I am at the point where all fluids are in, aside from fuel....
Thanks everyone, here are a few notes in the end. @dahveedem , The clutch does not need to have the ignition on as the ABS is not involved in...
I stand corrected, FBBs instructions sure did mention that bleeding should only take place when the pump is off. Listen for it!
Hello all, Just got the engine back in after a great experience doing the major plus a whole lot more. The car is still in the air as I prepare...
OK, here is what should be the final post on this thread: - The shims are all in and all lash is perfectly in spec. That took a long time and...
I realize I have not included any photos of my work, so here are a few .... [ATTACH] [ATTACH] [ATTACH]
OK, finally got it, and of course the math was correct. (Lead+180+Lag)/2 - Lead = the Intake center line. The reason why I could not...
Ernie and FBB ... you guys are entertaining! Like to get things done! I'm getting pretty good at this whole darned process, as it calls...
I see from reading FBB's post from way back (setting up cams), that he uses 3-4 paper inserts in 3-4 cam journal caps to hold it down enough to...
Quick question for you .... what are the best options for preventing rotation while torquing cam cog bolts and the crank shaft bolt for that...
Excellent description! I am a mechanical engineer with experience in a number of disciplines including some of the most pretentious (space based...
Like I said the instructions on how to place the belt were excellent! Thanks FBB! But I learned something that is interesting and I am wondering...
You are very correct, sometimes the index holes just don't line up. When that happens I found that by moving the gear one belt tooth, everything...
I will help FBB out by answering these questions for you Rupp3r: #1) Locking the cams in position can be done using various methods. One method...
