© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
EDIT: also check fuse F10 (7.5amp) is OK
Another suggestion - double-check the safety switch on the CIS airflow metering unit (2 pin connector, just under the air filter box) ?
Just a suggestion if the non-starting issue is on both cylinder banks - check if you have +12v battery voltage on pin 4 of each ignition module...
Yes the belts and tensioners/idlers can be inspected and if necessary done in situ (wheel off, arch liners out, ETC).
I would have the cam belts and tensioners/idlers looked at ASAP just to make sure all is well in that area. BTW the CSV connector can be...
Look inside the cap and you should see that there is a slotted brass threaded pin in the center of each rotor contact point. Carefully unscrew the...
After some work on my son's Mondial this past weekend I had the local inspector check out the exhaust system who then informed there are no other...
Just replaced a few fuel hoses this weekend on my son's 1988 Mondial. All the original pipes look OK from the outside - until you have a look on...
Had similar during a "spirited" high speed run and only after easing off the speed and she would then hesitate or stumble. Had all the ignition...
Multi-choice question to ponder on: One the Mondial (and other CIS models of similar ilk) the flexi fuel feeder pipe from the tank to the fuel...
Spot on!
My first Italian (car!) was a lovely white Lancia Fulvia S3 new in 1975 followed by a white Alfa Romeo Alfetta 1.8 new in 1977. Followed by a 1...
Still very sad to see though. Apparently the fellow is selling only the space frame and what little bodywork remains with no mechanical or...
Some fiberglass and filler plus a little polish should have this prime example sorted by the weekend. [ATTACH]
KN Wheels UK are still in operation. Their web address is: Minator Wheel Range K N Wheels Limited - Made in UK Have you double-checked and...
Speedo by-pass???
Therein lies the problem (with these engines in particular).
Similar experience here, my own thoughts are to think long and hard before changing coolant type in these engines.
Interesting - just noticed that reference to 15 liters. My copy of the Mondial 8 service manual (both 2V and 4V) gives the capacity as 24 liters...
Total coolant capacity should be 24 liters or 5.2 imp gal or 6.25 US gal (under normal water use 50% recommended as anti-freeze)
