© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
A double-DIN screen would not really help, because it would also be at a very shallow angle, and therefore not properly visible from the driving...
Anyone got suggestions for replacing the original single-DIN radio with a more modern unit which could also be used for a reversing camera...
Classy work and great attention to detail. The car also looks great in Black. Congratulations!
Wouldn't that suggest that the problem is in the fuel, and/or the fuel tanks?
But having said all that, if the filters at the exit from the fuel sump were replaced and in perfect condition, and if the in-line pressure...
This is something similar to what you describe. In my case these deposits were clogging up the WUR filters. The pic shows the filters (the...
3000 miles in 41 years?
I too faced the question of how I would (working alone) check the timing on my car. However I was part of the way to a solution because I had...
Interesting article today........ 2025 Bull Market List: 11 Hot Rides on the Rise Right Now - Hagerty Media
I have been thinking about how I would go about addressing the tail-down attitude of my car and had read everything I could find on how others...
OOps! The story continues..... I refilled the levellers to a pressure of 450psi, based on just one comment in another forum. Does anyone out there...
I have just today completed refilling my '82 400i load levellers. It seems to have been successful. I machined up a jig from Delrin and used Argon...
May or may not be relevant to your situation, but I've just experienced similar symptoms on my Jaguar V12. It had been lying idle for a few years....
OK, time to eat crow! Turns out I did something really stoooopid. On my car, there are three hoses exiting from behind the boot/trunk trim on the...
I don't see the cross-connection or balancing pipe between the two WURs
Having been down this exact same road myself with my car, the only solution is to be very methodical and eliminate possible causes one by one. And...
Could it be the pivot of one or both air flow metering plates is "sticky" and the plate is not returning to rest position when the engine is...
Thanks to everyone for the replies, and to Steve for the link to the parts list. If you mean Hose 20 from the first (left hand) tank, I don't...
I actually feel a bit foolish asking about this problem, because the answer must be very obvious. Anyway, I have just finished restoring my Series...
I checked mine some time ago, with the engine cold, and ambient temperature 10 centigrade (that's 50F for you colonials!), slightly sluggish...
