© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi Aidan, Actually I do because the use of Superglue mean't it was one of those more innovative fixes! 2004 was the last year I did the...
Just made one as per the ebay item (welded together a 1/2 drive shaft and sawn off 15mm spanner). Shall report on the success of this idea...
Greyboxer, Phil is just up the road, but is on holiday for 2 weeks. Others I have spoken to are happy to torque the bolts up, but I have to get...
BTTT. Need to refit the heads this weekend. Hills are out of stock!
308 box is transverse IIRC?
No Aidan, K2RUM met its death recently due to a large pothole, a treestump and two concrete posts. £35k's worth of damage, so it has become an...
Thanks Simon, I do think the point raised re: the gearbox remote linkage will be the primary issue.
Please email arnie[at]the-webbs[dot]com if you do. I only need the piston, ring condition immaterial.
Interestingly my last car revved to 9750rpm and produced 300bhp from 2093cc and was normally aspirated. It broke a few times nmainly due to...
I was hoping you'd have one Mark! Seriously however, thats a fair bit cheaper than the genuine item! Gives me a course of action if no-one...
Hello, Does anyone in the UK have an F355 head bolt wrench I can borrow for a couple of days?? I'm located near Gatwick. If you can help...
Well, I bought it. I've stipped the throttle bodies and manifolds off, and stuck the endoscope in the back of the exhaust valves. One of them...
Thx Guys, Mark, you are right, that was the purpoe of my call. ES do sell rings for £125/set although I also had an endoscope down the plug...
Thanks blkprlz. What I am trying to see is behind the flywheel. The F355 gearbox has no bellhousing - the clutch and flywheel are located at...
Hi, Does anyone have a photo of a 365gt4 2+2 or 400i engine taken out of the car? I need a clear picture of rear mounting face (i.e. the...
I am a relatively Ferrari novice, but I am building a sports car which uses the chassis of an Ultima and will look a lot like a 330/P4 and be...
Omex, MBE, DTA, Pectel, Motec, and do you have an fuel/ignition map for any of these ECUs??? Please let me know what you have, as this could be...
I have a US Spec F355 engine which is in a crashed car. I am asking the buyer to get it running (he's sold the ECU) as I intend to put into one...
Hello, I'm about to buy a 412, but before I part with my cash, can anyone give me a heads up on ALL the locations on the car where I should...
