© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Yeah, you're right. I looked back and I swapped over to the Brembos from a 355 and rebuilt those.
Porsche used the same calipers, I believe I had found the Porsche kits a while back, but I'll need to look back for information later tonight.
My point earlier was that there are probably BBK brackets and calipers that are for Porsche cars that would bolt right up to the 348/355. Again,...
The stock calipers are the same that came on a number of Porsche cars. There may be other options out there if people have the desire and time to...
These locations are what I use with my '90ts. I've used these when performing my engine out too and the car was good on the lift for the whole...
Very rarely are bigger brakes needed for street cars. They are purchased and installed for looks which really is no different than people putting...
If the modular are the same as the starfish, then machining the rear either 12 or 17mm is the way to go. I did 17mm for my starfish and I was able...
Post 45: https://www.ferrarichat.com/forum/threads/348-three-point-seat-belt-conversion.420412/page-2
Did you drill out the spot welds in the middle housing? I have yet to do that, but the center trim is waiting to be installed after I do it.
I purchased belts for a different car that bolt right in, but I would have gone with belts from Superformance if they had them at the time. (I...
I did it with my 1990. I switched to the normal style or euro style belts. I found a set of euro trim pieces and just cut the opening in the black...
Anyone else look at his Instagram and see the Nissan wheels and wheel bearings along with 14.25" brake rotors?
ernie, when are you getting that standalone installed and your special intake installed and running?
Rack bushing issue would cause a sudden lightness at turn in when turning toward the driver side. There's a lack of feel when the steering wheel...
Oh man, I've often thought about working over a BMW M70 motor to make it the S70 that came in the McLaren F1 if that's even possible. It's no 5...
I have the 550 rotors sitting on a shelf still if you need a set.
It happens all the time with mine. The bumper is lower and it does extend a good distance. FG is easy to have repaired and relatively inexpensive....
I have a few of these for under my cars: https://www.amazon.com/gp/product/B07BP1RGF1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 They work...
I have a MaxJax and used it for my last engine out and it worked great. (Probably wouldn't have bought the 348 if I didn't have the MaxJax)
My Coverking came today. Fitment is perfect. [ATTACH]
