© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
when its doing the high idle thing, is it always the same rpm? when it is at high idle does turning on the a/c load the engine back down? when...
Does that thing somehow also drive the odometer as well? Or is that from a different input?
is that because most everyone wanted a convertible?
usually they are used when the engine is cold and the fuel/air mixture is rich. my 355 and other cars you can hear it run for a short time on...
I've owned one for over a year now, 99 355 F1, no problems..... you'll have more issues with the top then that F1 transmission. The F1 seems...
when I replaced the seat potentiometer I just moved the seat the rear most position removed the seat, and then before I installed the pot I...
Applewood quoted me that for a complete round trip....
Was told that Applewood, Owner Bruce Hall does a good job. 304 283 3661. Although I have never actually contracted with them.
my 355 does the same thing, sounds like a freight train
Any one planning on going? If so are you planning on shipping your Ferrari?
if the engine cover isn't closed properly and that switch isn't made mine wouldn't go into reverse or 1st. I don't think you have to have the...
Please post the part number for that valve where you got it from. Thanks.
was in a 348 on the track that had an issue with the fuel filler hose. the one that goes from the gas cap filler neck to the tank, kind of...
think they were all in Beaufort NC.
I'll post the jag part number. but I didn't use the jag potentiometer. I removed the one from the ferrari part and installed it in the jag...
I you need a regulator I have one. I bought an extra one in case of future failures.
Not sure if this is known, but Jaguar uses the same seat potentiometer as the 355 it just has a different connector. all you need to do is take...
I did a write up on this with photos should be on ferrari chat somewhere... try searching
My 348 used to do that. started fine when cold, shut it down hot and try and start it within 20 minutes, not so good at times. You'd sit there...
I actually switch the entire MAF unit from side to side. I cleaned them also. I also cleaned/fixed one of the connectors. Not sure which fixed...
