© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Ok, exactly where is this nipple?
Hi, Thanks but that I know, but I also see that the fluid level in the reservoir tank shrinks when the pump is activated. The level increases on...
How to know if air is caught in the ABS pump? Having troubles bleeding the brakes. The pump needs to be on I discovered and read and fluid comes...
How to know if there is air caught in the ABS pump (Teves)?
Does anyonw know the thread spec. for the brake line connection 20/21and 29/38. See attachment. It's the front connections between LH and RH rear...
Hi, are the original headers manufactured by ANSA? It's engraved on mine at least so the thinking is if those are OEM or not?
Does anyone know the exact thread spec. for this union, connection to the air rail on the header? (#23 in the file) [ATTACH]
It was the torque wrench. A tooth was missing in it. Thank’s for the hint Sent from my iPhone using FerrariChat.com mobile app
Yeah, it might be so. Good hint. I used my torque wrench when doing the clutch job and something felt weired with it. Must check. [emoji106]...
After clutch replacement I found this part on the floor just beneath the clutch housing. (Manual) What is it and where does it fit?...
I'm starting to think that my bleeder sucks in air from outside via the treads when I unscrew it a little.
Now done the work - almost, but have a problem bleeding the system. I have a vacuum pump attached to the bleeding nipple and the fluid in the...
A broken throw out bearing example. Happened to me last Sundau Sent from my iPhone using FerrariChat.com mobile app
[ATTACH] Sent from my iPhone using FerrariChat.com mobile app
Is there a specific rotational position for the flywheel to the center engine out axis? Can't see any mark or hint?
If it only sounds when the gear is engaged, it can be the last kogg wheel in the end of the gearbox closest to the rear wall. That wheel can came...
Also, is it better or easier to fill the oilsystem and bleed it prior to put the pumpkin back?
Great, I will use the same process. Don't you need to pump the clutch pedal to fill the system?I'm concerned that the level in the filler tank...
When doing work in this area one can check other parts as well. I checked the play in the gearbox axle. (Outer axle) What is a resonable play? I...
Ok, I thought that sealing was broken too. So this is a common failure? I hope the new one from HE will last better I just ordered.
