© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
In any case, the center console is installed relatively simply withe 5 hex bolts and several phillips head screws. The emergency brake handle has...
With the center console in place I installed the lower cover plate with the two hex screws and move on to what is actually called the center...
Dave, you are probably right but it is not that sticky yet. Some parts in the interior are getting close.
Finally, for today, some pictures of the attaching screw points. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
From here I moved on to the center console for which there is only one connector (although be aware of other connectors that need to be attached...
When installing you need to be careful of the connector to the light switch as there is not much clearance and it could be bent as someone did...
Although when I was taking the dash out I removed the glovebox before the center console area, I found it easier to install it first so that the...
Another tip of the day: When taking apart the dash, separate and label all the screws as to where they go. Although they look similar there are...
Then install the hood release latch while it is easy to get to. Because of the difficulty in attaching the 2 screws indicated in one of the...
With the dash in place the driver’s side dash under cover is installed. You will have to reinstall the steering column first. The 4 socket...
Tip of the day: Before you tighten down all the fasteners make sure your wires are going to where they will end up and not pinched down or hidden...
But before you get carried away and tighten everything down, dont forget to put in the upper right and left ducts that go from the center...
Next is is a matter of attaching the dash structure with the fasteners which include one nut on each side, 4 bolts and metal shim to the airbag...
The three tabs on the front of the dash structure slide into the matching fixation points on the body below the windshield. You can refer to the...
From here I put on the VIN plate and installed the dash back into the car. A second pair of hands is helpful, but not necessary, mostly to keep...
Anyone know what this connector does or where it goes. Upon taking apart the dash it was not connected to anything and I can't find a companion to...
You basically just slide them in place, bend the tabs in the front, screw the tabs on the side and put on the larger and smaller nuts/washers....
With the center and side speakers in place I moved on to installing the fibercarbon covers, a smaller one on the driver's side and the longer on...
No I didn't, cover it with leather. I just made a small hole in the leather and pushed the plastic cover on. Mine was pretty tight when I took it...
12 hours is actually pretty good if it is your first time around. You must have done some struggling leaving the seats in place. I am putting...
