© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Rob, I'm not clear why the motion ratio term is squared when calculating wheel rate. James
Was air conditioning standard or an option on North American market 308s?
Just one datapoint, but I like silver and would consider it if I were buying a 360.
It's time for a science fiction break ;-). What changes will significantly lower process times in the studio? Perhaps holographic presentation...
Just what every home hobby shop needs!
Do you know what type of machine is used to mill the clay? Based on a little searching the Kolb Studioline seems popular....
I think people can learn to push the buttons on most software tools in a 2-3 months. The bigger problem though is learning how to apply them to...
Thanks for the thorough reply. I'm a mechanical engineer and my interest here is to learn more of the studio workflow. I've done technical...
Out of curiosity how do you get such accurate wheel openings and edges in the clay...especially on the smaller scale models. I'll have to start...
So if polygon models are created I presume they are a supplement to sketches for the clay modelers to work from? Have you ever heard of them being...
Thanks for posting the pics. So if a steel is drawn over the surface the gut prevents it from cutting any deeper into the edge. What scale of...
For the studios using polygonal modeling for surface design/development, which software tools are popular?
Those two cars provide a great contrast in making your point! Thanks.
That does help....thanks. The edges depend on the adjoining surfaces, and the surfaces depend on the edge. Which comes first... Is it common...
Can you elaborate on this. What is gut? Thanks.
That's London, Ontario, Canada.... about 2 hours from Detroit. Go for it Roy!
Ironic...you prevent fires for a living...and start them in your spare time ;-)
It's a small distinction, but the force required to overcome aerodynamic drag increases with the square of speed. The power required increases...
Will Ferrari be able to reach the 12C's weight with the current 458 chassis, while maintaining an acceptable level of comfort?
Perhaps the rate is moderated to avoid upsetting the balance of the car.
