© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
IIRC there are more than 2 holding that piece. It’s been over 10 years now and I did not take photos….. sorry.
On my ‘82 GTSi …..Remove the side window then drill out the rivets. Also engine bay screws are a challenge. Behind the top crossover pipes
[ATTACH]
Try Amazon…….. Sika Sikaflex-221 - Black - Multi-purpose polyurethane sealant/adhesive - Creates permanent elastic seal - Sandable/paintable -...
Today is Saturday, Nov. 4, the 308th day of 2023.
Some guys just use a piece of expanded metal. Keeps out large stones and birds, yet lets air flow either way it’s needed……
1973 Mercedes Benz 450SL Roadster….. [ATTACH]
When I do the drop gears I just stick a rag between the gears. Would that be an option in this case?
Might check the ground contact points in that Circuit.
Someday I would like to try a set on my ‘82 308GTSi……
Try these. CV Joint Pressure Washer Porsche 901-332-312-00 CV Joint Circa Clip Porsche 999-152-084-01
I use this compressor for 308 Shocks….. very safe/comfortable tool. [ATTACH]
Correct. Nothing on either surface. Same with Transmission and Oil pan. Clean, dry and torque correct. Never had an issue with any of them....
I’ve only done this about 12 or so times. Same rhythm every time…. 6.5 ft lbs, circler pattern from center outwards, green gaskets clean and...
Is there anything dripping onto the garage floor while it’s been parked all this time now?
My ‘82 is 7x975
Great write up gentlemen. Much appreciated!
It sounds like you’re not quite sure if it’s the seal or the O-ring. The seals on a distributor shaft can be purchased as directional seals, With...
There are many existing threads on this topic.