© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
While you are there, 1/ just beef-up all the grounds. From memory there is a ground post on the left side of the steering wheel. 2/Clean the...
Cohline braided hose : 2633.01.1300 Cohline non braided : 2633.1300 (£14.40 per meter)
Which o-ring did you use for the pressure regulator? Same question for the shims... Mine are properly regulating, but as these are the last bit...
You are so close to the flywheel, why don't you just use two hall sensors and a pair of microplex from the 412/testarossa? Another approach would...
After so many years, just change the Cohline hose. The "argus" fittings are re-usable, it's a clever design. Braided hose is expensive as Cohpro...
For the wiring, I did follow the antenna wire that comes from the right side of the seats. There are quite a rew layers to cut out, including...
Depending on the coolant you use, its water content may bubble under high temperature, which leaves residual pressure for quite a long period of...
It seems very strange to me that this v12 is unevenly distributed. Ferrari does not cast their crankshaft, they machine them: why would they spend...
Ferrari camshafts are normally quite optimized for a given duration, so the usual cam tweaks (grind the back of the cam) will not work. More...
You mean the magneti marelli jag distributor? It's very similar to the 400i one, in a more troublesome fashion... maybe you could retrofit the...
There are filters "before the pump", built.in the fuel pickups. Usually they need replacing. You need some highflow filter, or you may starve...
Looks Like the brownish tank crude that was removed from my tanks. Old.gazoline residues that are dislodged by modern fuel. Looks like brown...
Same window emergency tool (plastic and metal), and same paint also. Makes it much easiear at the bodyshops that have all the peugeot paintcodes...
Looking at the whole picture, there is some sort of complete circle around the whole liner. My guess, is this could be related to the machining...
As this is not free content to be published online, I've made a small private conversation on the subject. If anyone else is interested to be in...
Unfortunately the diagram is for the original 400i, not gen2. I will dig into my archives to see what I've downloaded from his collection and will...
