© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks for all the resources! Have a rainy weekend ahead so plenty of garage time for me and my junior assistant. Knowing the effects of errant...
Pressure bleeder is like new. Been using it to service my Porsches as well. Same cap size & threading, interestingly enough! If there was a...
You are correct, it ran fine until after the bleed... I'm also dumbfounded that a bleed would cause this. I don't have the old main board as I...
IMG_20200107_140359 by blownfuse posted Jan 9, 2020 at 9:59 AM
Smoked Brake Reservoir, 88 Mondial 3.2 w/ABS
Yeah that's my first look. I was able to start and run the engine without incident a few times before this happened, so it must've been something...
[IMG] 1988 3.2 Cabriolet with ABS Had been sitting for a while with electrical issues. I replaced the main board with a nice repro from G.T....
If your jack is strong enough you can just use a single jack to raise the entire rear end of the car. The Mondial is body-on-frame so it is very...
As the saying goes: just because you "can" doesn't mean you "should". Please don't encourage the hot-heads that are leading the drive, by...
It was a couple years ago. Don't have his number anymore... sorry.
There's also the active members that are driven away by this forum's owner and moderators. Seems they're only interested in monetization, and...
I've done this as well. Was taken to court by one rather bone-headed buyer, the judge saw the papers I had the buyer sign, tossed the case out......
I've worked with Luis at L&M Touchup. Great work, and prices are quite reasonable.
The battery's capacity isn't the limiting factor. Modern EVs have plenty of capacity, problem here is they're not designed for this use case....
Really appreciate that you're taking us to "brake school" here, moysiuan, thanks!
You raise a good point. I put a set of Hawk pads on when I bought the car, haven't checked to see if they're comparable to OEM. The big brake...
That looks decent, esp. with the weight reduction of the aluminum calipers. I've got 355 wheels which give an 18" diameter, so plenty of room for...
I ditched these connectors altogether and went with .125 spade terminal connectors. Wiring each circuit individually was a total PITA, but these...
I'm having a similar issue with my 3.2... got the board from GT Car Parts, did a straight-across swap with the OEM board, and now my dash lights...
I had a similar noise in my 3.2, turns out it was the water pump idler bearing. Scary noise, but cheap and easy fix. Once disassembled it was...
