© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have a US version Dino 246 with no AC and am wanting to get rid of the existing heavy and space consuming mounting bracket (made to house the...
Thanks. Mar3kl was kind enough to send me information to make a sticker that worked perfectly. Alex
I found a used BCD pump on the internet and followed the procedure on taking it apart and putting it back together. It was actually quite simple....
Thanks for the useful information. Much appreciated. Alex
Does anyone have a source for rebuilding a BCD fuel pump or a source for buying a rebuild kit or a rebuilt BCD pump?
The vibration is consistent at all rpms. When the car is in the air on jack stands and running, I can feel the vibration when I touch the frame....
Thanks for the recommendation. I checked the harmonic balancer pulley and it looks to be in good condition.
I replaced all four engine mounts in my Dino and now I have a vibration that goes through the chassis of the car whenever the engine is running....
I got the cable from Ferrparts and it did need to get shimmed to work correctly too. I had some friends come over and between all three of us we...
How do you know if you need a spacing washer? Is it based on pedal play or is there an alignment issue that requires the spacer?
Thanks for the quick response. I don't seem to be able to get enough slack in the able to get the helper spring installed. If you could elaborate...
I had a clutch cable snap the other day on my 1972 GT. I installed a new green cable and am having trouble getting it hooked up. Is there a...
Thanks for the detailed response! I had checked with Parker Hall and have the one on the top right, but the amperages are different on the first...
I have been looking everywhere for a fuse box decal that matches my original one (1972 GT) shown. I have checked many sources and none of them...
Fantastic work! Who do you use for the vacuum metallization?
Thanks Brian, Option one worked well. After removing the air box and everything else that was in the way, I pushed on the spring to get it...
I need to reinstall the clutch helper spring and can not get it to compress enough to set it into the perch. I have searched the archives and can...
I need to take the driver side roll up window out of my 1972 246GT (with power windows). Can someone suggest the best way to perform this...
I was able to get the two receptacles through Ferrparts, but I had to get the receptacle with the vent. If anybody needs two vents (see picture)...
Thanks. Do you have the part number you ordered?
